Public Job Postings

Key Responsibilities:

• Directly supervises Engineers and drafters and report to Lead Engineer/Engineering Manager. 

• Coordination with other disciplines including structure, piping, mechanical, instrumentation, process for 

improving project execution. 

• Review and approve electrical system studies modelled in ETAP and other similar software such as Short 

circuit study, Load flow study, Motor starting study, Harmonic study, Relay coordination study. 

• Responsible for preparation/review/checking of Electrical engineering discipline deliverables as per project 

requirements. 

• Assisting the Planning Engineer in scheduling project activities. 

• Interfacing activities and meeting with project team, Client, Vendors and subcontractors. 

• Monitoring quality, cost, time for performance of the work in accordance with contractual requirement, 

project/company standards and procedures. 

• Preparing Electrical Activity list, checking and approving of all electrical documents. 

• Attending and participating in project HAZID, HAZOP and ELSOR (Electrical Safety and Reliability Study) 

meetings and responding to third party study on projects. 

• Preparing /checking of Calculations, Studies, data sheets for Electrical Equipment including Motors, 

Transformers, Switchgears, UPS, Charger, etc. 

• Review and comment on vendor drawings and incorporate vendor data in design deliverables. 

• Ability to perform site visit and collect required details to prepare engineering deliverables and to highlight all 

possible issues during project design. 

• Coordinate with project construction team during construction stage. 

Requirements:

• Recognized Bachelor’s Degree in Electrical Engineering or equivalent from college/ university 

• Registered with Board of Engineers, Malaysia 

• Minimum 5 to 7 years of experience or more of work experiences in onshore/offshore engineering in oil & gas 

industry. 

• Good knowledge in Hazardous Area Classification and Selection of Ex-Proof Equipment. 

• Good knowledge in Electrical equipment sizing calculations for switchgear, transformer, cable and UPS. 

• Good knowledge in Design of Substation (sizing, arrangement, cable arrangement) in industrial Plants. 

• Ability to handle HAZID, HAZOP, ELSOR study/meeting. 

• Knowledge in energy management, renewable energy, in particular solar, would be an advantage. 

Key Responsibilities 

• Directly supervises Engineers and drafters and report to Lead Engineer/Engineering Manager. 

• Preparation of RFQ, Material Requisition, Technical Clarification and TBE. 

• Review/Check Vendor Data and incorporate in engineering deliverables. 

• Support other disciplines in evaluating equipment packages and carry out Inter-discipline document 

review 

• Preparation of Instrument Index, I/O List, Datasheets, Termination Diagrams and Loop Diagram. 

• Preparation of Hook-up Diagram, Typical Installation drawings and MTO/BQ. 

• Preparation of Instrument Location Layout, Main Cable Routing, Cable Block Diagrams and Wiring 

Diagrams. 

• Preparation of Fire & Gas layout drawings, Routing Diagrams, Block Diagrams and Wiring Diagrams. 

• Check/review/comment drawings and documents prepared by subordinates and to guide and advise 

them accordingly. 

• Review ITB/Scope of Work documents from prospective Clients and prepare manhour estimates and 

support Proposals team as required. 

• Perform project engineering duties and support Project team as required. 

Requirements 

• Recognized Bachelor’s Degree in Electrical/Electronic Engineering or equivalent from college/ 

university. 

• Registered with Board of Engineers, Malaysia 

• At least 8 – 10 years of experience or more of work experiences in onshore/offshore engineering in oil 

& gas industry. 

• Conversant with international design codes and standards. 

• Ability to carry out site visits and to incorporate design details accordingly in engineering deliverables. 

• Familiar with MS Office software including MS Word/Excel. 

• Committed and disciplined to complete assigned work to required standards and meet project 

schedules. 

• Strong initiative & highly motivated in performing tasks given. 

• Able to work independently and guide juniors in their professional development. 

• Able to work effectively in a multi-discipline engineering environment, showing good leadership and a 

“team player”. 

Mission and Service DimensionsAs the FPSO Control System Area Lead, you will oversee all activities related to the Control System within the FPSO team, reporting directly to the FPSO Technical Manager. In collaboration with the ICSS Lead, you will:

• Assist with engineering and procurement activities for Control System equipment.
• Manage preparation and construction tasks related to equipment modularisation.
• Coordinate integration of modules onto the FPSO.
• Oversee pre-commissioning/onshore commissioning and offshore commissioning and start-up preparations.

Key Responsibilities

• HSE and EthicsExemplify and enforce H3SE (Health, Safety, Security, and Environment) standards.
• Promote adherence to Company Ethics and the "Code of Conduct," ensuring compliance with the Anti-Corruption Program.

Technical and Project Management

• Ensure alignment with FPSO-related Company Rules, Project Particular Specifications, and international standards.
• Coordinate engineering development by contractors and vendors with the ICSS Lead.
• Oversee timely procurement and expediting of equipment from vendors and sub-vendors.
• Liaise with QA/QC leads to ensure compliance with Inspection and Test Plans (ITPs).
• Monitor and manage construction, integration, and commissioning activities, including:
• Ensuring contractor compliance with contractual requirements, procedures, and specifications.
• Reviewing and commenting on construction deliverables and procedures.
• Preparing and overseeing pre-commissioning and commissioning tasks.
• Addressing technical issues and ensuring prompt resolution.
• Maintain robust communication with contractors, conducting regular technical meetings to address progress and provide guidance.

Risk and Interface Management

• Anticipate potential risks, participating in risk assessments and mitigation planning.
• Facilitate cross-discipline collaboration to optimise package/module designs and integration.
• Report progress, highlight technical issues, and recommend solutions to the FPSO Technical Manager.

Context and Environment

This role supports the development of a major project in Suriname, involving the deep and shallow-water discoveries of offshore Block 58. The Suriname GPI Project Team aims to maximise economic outcomes by optimising reserves, schedules, costs, and reducing greenhouse gas emissions, all while upholding high H3SE standards.

Position Details

• Start Date: 1 February 2025 (anticipated duration: 3–4 years).
• Location: Malaysia (Kuala Lumpur), China (Shanghai), and other sites as required.
• Status: Residential.

Qualifications and Experience

• Education: Degree in Automation or IT Engineering.
• Languages: Fluency in English; knowledge of Chinese and French preferred.
• Professional Experience: Minimum of 15 years, with at least 10 years in project environments.
• Technical Skills: Advanced proficiency in technical management and Excel.

Adopt and demonstrate exemplary behavior regarding H3SE policies and procedures, implementing H3SE rules and requirements within the relevant area of responsibility and complying with H3SE training requirements. Adopt and demonstrate exemplary behavior regarding Company Ethics and “Code of Conduct” policy and promote the re-enforcement of the Anti-Corruption Program.

During the Service execution, the Service holder will need to ensure that:

• Project QMS will be duly implemented by all team members of the UFR package.

• The UFR EPC and Service Contractor Quality Management System will be fully developed, established & maintained in compliance with the EPC Contract, and that specifically, but not limited to, will be in line with Contract Exhibit H.

• The UFR EPC and Service holder will be enforcing contractual commitments; will be implementing its own Contract Quality Plan and Objectives, and will be safely, effectively, and timely performing its activities according to the Company specifications, designs, and codes.

• The UFR EPC and Service holder will be controlling specifically the most relevant ISO 9001 processes such as quality audit, quality NC management, corrective and preventive actions management, KPI management, quality inspections, lesson learnt and feedback management, calibration and testing management, and technical standards management.

• The service holder will also be controlling the most relevant ISO 9001 processes, including quality audit, quality NC management, corrective and preventive actions management, KPI management, lesson learnt, and feedback management.

Qualifications & Experience Required:

- Knowledge of the UFR Products and relevant Quality regime

- Significant working experience in a similar service within the Oil and Gas field

- Languages: Fluent in French and English - Professional Experience: 15 years minimum

- Experience within project/s: 10 years minimum

Responsibilities:-

• Responsible for preparation/review/checking/approving of Electrical engineering discipline deliverables as per project

requirements.

• Review and approve electrical system studies modelled in ETAP and other similar software such as Short circuit study,

Load flow study, Motor starting study, Harmonic study, Relay coordination study, etc.

• Interfacing/Coordinating activities and meeting with Project team, Client, Contractor, Vendors and subcontractors.

• Ability to prepare presentation material and conduct meetings with Clients for electrical engineering related matters.

• Monitoring quality, cost, time and performance of the work in accordance with contractual requirement, project/company

standards and procedures.

• Attending and participating in project HAZID, HAZOP and ELSOR (Electrical Safety and Reliability Study) workshops and

responding to queries accordingly as well as updating relevant deliverables based on recommendations proposed.

• Preparing/checking of Calculations, Datasheets, Studies for Electrical Equipment including Motors, Transformers,

Switchgears, UPS, Charger, etc as well as generating Load List, Single Line / Block Diagrams, Earthing/Lightning/Cable

Routing Layouts drawings, Cable Schedule/MTO, etc.

• Possess good understanding of international design codes and standards.

• Preparation of RFQ, Material Requisition, Technical Clarification and TBE.

• Review and comment on vendor drawings and incorporate vendor data in design deliverables.

• Coordination with other disciplines including civil/structure, piping, mechanical, instrumentation, process for improving

project execution.

• Ability to carry out site visit/survey and collect required details to prepare detail engineering deliverables and to highlight

possible issues during project design.

• Coordinate with project construction team during construction stage.

• Ability to provide engineering manhours and support Proposal Manager in preparing bid submissions.

Requirement:-

• Bachelor Degree in Electrical Engineering or equivalent from a recognized University.

• Minimum 10 years working experience in Onshore Refinery/ Petrochemical/ Oil Terminals/ Process & Oleochemical

plants/ General Industry with engineering design experience.

• Good understanding of project requirements in above-mentioned industries, in particular safety, schedule and quality

aspects.

• Must be registered with Board of Engineers Malaysia (BEM), with PEPC.

• Self-driven, highly motivated and able to work independently in carrying out given tasks with minimum supervision.

• Responsible and committed towards safe-guarding Company interests in the execution of project duties.

• Experienced in handling designing greenfield, rejuvenation and revamp project.

• Team player who works well with and supports fellow project members in a multi-disciplinary engineering team.

• Good command of spoken and written English and familiar with MS Office software.

• Ability to communicate clearly and effectively with all levels of staff within the organization as well as with Clients, Vendors

and Contractor.

• Ability to train, provide guidance and manage junior engineers.

• Possess NIOSH/CIDB Safety Passport

Job Summary:

Malaysia LNG (MLNG) is seeking a skilled Senior Planning Engineer to join its team in Bintulu on a full-time basis. The role involves managing scheduling activities using Primavera P6, with a focus on turnaround/shutdown planning in an onshore petrochemical environment. This is a 1-year renewable contract, starting in January or February 2025. Preference will be given to Sarawakian or Malaysian candidates.

Job Responsibilities:

• Develop and manage detailed schedules for turnaround/shutdown projects using Primavera P6.
• Update and adjust project schedules promptly to accommodate operational changes and priorities.
• Coordinate with multidisciplinary teams to ensure alignment with project timelines and objectives.
• Monitor project progress and provide regular status updates and forecasts to stakeholders.
• Identify and mitigate scheduling risks, ensuring adherence to project deadlines.
• Review contractor schedules and progress reports, ensuring compliance with MLNG’s requirements.
• Support project planning, including resource allocation and critical path analysis.
• Collaborate with onshore petrochemical plant operations teams for effective turnaround execution.
• Generate detailed planning reports and ensure timely communication of schedule updates.

Job Requirements:

• Bachelor’s degree in Engineering, Project Management, or a related field.
• 5 to 15 years of experience in planning and scheduling, with at least 3 years of proficiency in Primavera P6.
• Proven expertise in turnaround/shutdown planning within the onshore petrochemical or oil & gas industry.
• Strong understanding of scheduling principles, critical path analysis, and resource leveling.
• Ability to work under pressure and adapt to changing project demands with immediate action.
• Strong communication and organizational skills for effective collaboration with project teams.
• Preferably Sarawakian or Malaysian nationality.
• Willing to be based full-time in Bintulu, at MLNG’s oil & gas plant.

Location: Remote with periodic visits to the client site in Shanghai

Work Mode: Contract role

Job Summary

Our client is seeking an experienced EPC Project Manager to lead the end-to-end execution of offshore wellhead platform projects. The role involves strategic planning, multidisciplinary team coordination, risk management, and ensuring technical, safety, and financial compliance. If you excel in managing complex EPC projects in the offshore oil and gas sector, this is an opportunity to drive impactful results.

Job Responsibilities

• Oversee project lifecycle from engineering design to procurement, construction, and commissioning.
• Develop and manage project schedules, budgets, and critical path analyses.
• Lead and coordinate multidisciplinary teams to achieve project objectives.
• Conduct risk assessments and implement mitigation strategies.
• Monitor project financials, ensuring delivery within budget constraints.
• Maintain communication with clients, regulators, contractors, and internal stakeholders.

Job Requirements

• Education: Bachelor’s degree in Marine Engineering, Petroleum Engineering, Naval Architecture, or equivalent; advanced degrees or PMP certification preferred.
• Experience: 15-25 years in managing EPC offshore oil and gas projects, with wellhead platform expertise.
• Technical Skills:

1. Proficiency in Primavera P6, MS Project, and ERP systems.
2. Familiarity with AutoCAD, PDMS, and offshore platform standards (API, ASME, DNV, ISO).

• Competencies: Strong leadership, communication, problem-solving, and stakeholder management skills.
• Language: Fluency in English; proficiency in Mandarin is a strong plus.

The PMC/PMT Project Manager will oversee the FPSO project in Kuala Lumpur, ensuring successful execution, compliance with industry standards, and alignment with organizational goals. Responsibilities include managing project phases such as design, construction, and commissioning, while maintaining HSE compliance and budget control.

We are looking for a Senior Drafter with expertise in architectural and structural drafting. The candidate should have experience in creating detailed technical drawings, collaborating with engineers, and ensuring compliance with industry standards. Proficiency in AutoCAD and Revit is required. Remote work is preferred.

Timing and Location

 Role: QC Inspector TMCP Plate

 Location: Voestalpine, Linz, Austria

 Start Date: 2nd December 2024

 End Date : June 2025

General

• TMCP Plate manufacturing experience essential.

• Good communication and leadership skills

• Previous experience at vendor advantageous.

• Good computer knowledge against standard MS Office software package

• Read, understand and Comply with all Project HSES standards & documentation

• Fully committed to Project ethical values and to achieve Project expectations and goals,

which shall include a proactive approach with other project department to achieve these goals.

Qualification and knowledge

• Level 2 NDT qualifications as per ISO 9712 or ASNT Central Certification Program (ACCP) in UT/

MT

• Experience of calibration and results interpretation from automated equipment for NDT

• Experience in destructive testing including DWTT’s.

• Fully conversant with DNV-ST-F101 requirements and relevant general international standards

(e.g. ISO, ASME, ASTM, EN etc.)

• Experience witnessing Plate Mill activities; including casting, rolling, marking etc.

General Inspection duties description

Inspector shall in general be responsible for monitoring performance of both contractor and sub-contractor

and Quality Control matters. Main tasks include:

• Witnessing Supplier/Contractor activities ensuring the proper implementation of the approved

Inspection & test plans and relevant QC Procedures.

• Highlighting any non-conforming material or activity for Supplier/Contractor to issue the relevant

report and corrective action

• Reviewing Inspection Test Records upon completion of test and inspections ensuring

their timely issuing by Supplier/Contractor to prevent backlogs.

Specific Plate Mill duties

Mill surveillance ensuring activities are carried out in line with technical specification – ITP/ MPS and other

project specific procedures where applicable.

• Witness reheating of casting

• Witness slab reheating, drop out, final rolling, final cooling, monitor cooling rate.

• Witness Plate Marking.

• Check NDT technician certificates, Witness AUT verifications and follow up MUT and check

results in