Inspection freelance

Lead Package Engineer, TurboMachinery, Rotating Equipment Package, over 22+ years experienced, Offshore Topsides

Engineer, Manager, Inspector

Since 1992 he is a Civil/Structure Engineering in Civil Work in Oil & Gas Industry (LNG Tangguh), Power Plan Project in PLTU-2(350 X 3 ) MW Palabuhan, PLTU 2 x 110 MW. Kariangau Teluk Balik Papan. PLTU 670 MM Salira village Serang Banten.. PLTU 315 MW.Lontar Tangerang Banten. Pulp and piper mill project RAPP Riau for Civil   He has experienced in On-Shore / Off-Shore Construction and Engineering for oil & gas, power plants, road & bridges, Jetty,WWTP and WTP, Piling and Piping Project.   These experience has given him the opportunities to develop his ability to learn the skills inlcuding Communication skill, and the most importantly was increased his experinces to work in project management and quality assurance, understood in International Codes & Standards Rules ISO 9002 series implementation. 

Engineer, Inspector, Manager

 Accomplished various types and units of newbuild MODU Rigs (7th gen UDW Semi-submersible & Cyber Jack-Up) and Offshore vessels.  Provide technical support and site supervisory during Pre-fab/Fabrication, Installation / Lifting / Alignment, Mechanical Completion and Pre-commissioning then Commissioning of mechanical and machinery both static and rotating systems and packages, HVAC and LQ/Accommodation, insulation (thermal & acoustic) and Fire protection (active & passive) including LSA/FFA.  Supervise discipline engineering and procurement deliveries, and participate in Constructability Review, HAZID / HAZOP, and 3D Modelling.  Perform all discipline engineering assignments (independently or in team), review and comments detailed designs, ITP procedures, provide Technical Proposal & solution, and solving site queries by ensuring comply with all applicable rules, regulations, class requirements and project specification.  Overseeing, inspect and ensure all equipment & machinery preservation procedure are applied and followed by contractor/yard & sub-contractors as per Vendor/OEM and company standard, generate punch list prior installation and after installed on board.  Survey, audit and inspect MODU rig condition and equipment then Ready to Drill Integration test (SIT), as well as site supervision and coordination of BWTS and N2 system retrofit and fitment projects.  Serve as Subject Matter Expert (SME), mentor and resource in engineering disciplines (Mechanical, utility and marine, HVAC/LQ, Insulation, Piping, maintenance) for other engineers and inspectors.  Coordinate with other disciplines for optimum mechanical layouts, then review of contractor, sub contractors and vendor documentation, and handle interface matters with relevant parties.  Witness and comments/punch list at FAT and SAT of mechanical machinery and equipment.  Onsite supervision and ensure piping contractors working within the latest approved AFC drawings, project specification and ITP for all fabrication, fit-up, reinstatement, hot oil/chemical flushing and blowing as well in hydro/pressure/leak test and must comply with all aspects

Superintendent, Engineer, Supervisor / Technician, Inspector

Offshore/Subsea Structure/Installation Engineer with 12 years of experience in engineering, project management, and execution of oil and gas projects in both greenfield and brownfield areas. Project member of FEED, EPCI, and IMR Project (Contractor and Oil and Gas Operator/Client) which performing a feasibility study, detailed design, preparation work for construction, fabrication phase, construction, installation, and modification (repair and removal), monitoring project for offshore and subsea projects.

Engineer

I have over 20 years experiences in Instrument and Control Automation. My specialist are, PLC/DCS Programming and system, Wellhead Control Panel, & ATEX. My Highlight Skill Below: - • Expert in Detail Engineering for Instrument, Fire & Gas, Telecom and Control Automation • Expert to read and understanding all Technical Drawings and Isometric, structure drawing for Oil & Gas and general included Termination diagram, P&ID, Logic diagram, Cause & Effect, Loop Diagram, Single Line Diagram, Cable block diagram, Schematic Drawing, Cable Schedule, System Architecture etc • Well capability in design, installation, modification, commissioning and maintenance for all types of process control Automations/instruments. • Specialist in Programming, Modification and Maintenance of Programmable Logic Control (PLC) Distributed Control System (DCS) and Integrated Control Safety System (ICSS) •  Well capability in, modification, commissioning and maintenance of Wellhead Control Panel (WHCP), Shutdown Panel, ESD Panel. •  Well capability in inspection Hazardous area (ATEX) for Electrical, Instrument, Telecom. (EX-Inspector) * Good in a Trainer to train all employees and customer related Products and safety

Engineer, Manager, Superintendent, Inspector, Supervisor / Technician

I am a Bachelor of Science in Instrumentation and Control Engineering graduate from Batangas State University, Philippines batch March 2004. My 16+ years experience in the Power Generation (Renewable-Binary Geothermal), O&G, Sulphur Granulation / Storage / Shiploading, Petrochemical, Water Desalination, and Construction/Commissioning/Maintenance Industry has provided me with the opportunity to enhance my overall knowledge of a variety of facets and the workflows in Engineering, Construction, Completions/Commissioning, Maintenance, and Operations. Being a versatile Instrument Engineer is the key to any successful and safely executed project and working in challenging environments has provided me a unique understanding of the requirements necessary to deliver great results in a safe productive manner. 

Engineer, Inspector, Supervisor / Technician

II'm 46 years old. I'm from Batam, Indonesia. I have experience in Oil & Gas fabrication, FPSO module fabrication, E-House, Substation, Shipbuilding, Plant more than 16 years in various position such as QC PIPING/STRUCTURE INSPECTOR, QA QC ENGINEER, PRODUCTION ENGINEER, PROJECT CONTROL, CONSTRUCTION SUPRVISOR & PRODUCTION COORDINATOR. I' ve great enthusiasm, highly motivated, a fast learner and a self starter.

Supervisor / Technician, Superintendent, Engineer, Inspector

Highly motivated and results-driven HSE professional seeking a challenging role in the oil and gas industry. Offering expertise in process safety support, HSE supervision, PTW coordination, and project management. Dedicated to maintaining HSE standards, ensuring compliance, and promoting a culture of safety. Committed to driving operational excellence and fostering a safe working environment.

Dear Hiring Team I am looking for weekend inspection job I got double certificate on CSWIP 3.1 and AWS CWI Experienced in creating WPS , WQT and PQR Good communication skills and attitude.

Other, Inspector, Engineer

Senior Instrument and Control System Engineer with 20 years of experience in project execution, design validation, and commissioning of instrumentation systems across petrochemical, power generation plants, and oil & gas sectors. Proven ability to coordinate multidisciplinary engineering activities, prepare technical documentation, and support construction teams during installation and commissioning phases. Extensive experience in validating vendor-supplied control valves, process sensors, and safety elements in compliance with international standards

Engineer, Supervisor / Technician, Superintendent, Inspector

More than 13 years inspection and supervising experience with fabrication process, testing and QA/QC in the oil and gas industrial, structural, piping, vessel, pipe line and receiving tank. Have good knowledge of concept on welding and construction code (AWS, ASTM, ASME, API, ISO, etc) and standard, client specification and drawing of construction project in field of offshore, onshore, chemical plants and etc. Familiar and performing QA/QC activity as such WPS, WPQT, interpretation various NDE method, method statement as per Quality Manual and Quality procedure, material receiving or inspection and traceability techniques. Committed to implementation the highest safety health and environmental standards

Inspector, Supervisor / Technician, Engineer, Superintendent

I' m Surya Christ work experienced 15 years and previously working as Project Engineer/Manager & Offshore Field Engineer/Supervisor/ Superintendent - Construction Site Representative (experienced in Oil/Gas Energy, OWF/WTGs, LNG Train Liquid Natural Gas, FPSO, Refinery, Marine Industry) and in business type company PECMS, PMC, EPCIC, EPCI, EPC following scope for construction deliverable of offshore oil & gas facility develop jacket substructure & top side platform (Process P/F, Wellhead P/F & Service P/F/LQ/E House/sub station room), renewable OWF/WTG (jacket foundation/TP/offshore substation platform and substructure), onshore oil & gas facility LNG train & Refinery (for process & utilities, storage & module rack), FPSO Topside module, Supply Vessel for piping, steel structure, mechanical HVAC System. I'm 37 years old, excellent in English, dynamic person, quick learner, high leadership also knowledge with site survey, design/review drawing, fabrication engineering, project management and methodologies, production plant, installation/erection, tie in, hook up completion, pre commissioning & testing commissioning and able to work in full time

Engineer, Superintendent, Supervisor / Technician, Drafter / Designer, Manager, Inspector

An innovative Chartered Quality, Risk and HSSE Professional – CQI Member (CQP MCQI), IRCA Certified Principal Auditor QMS, with a wealth of proven experience in senior management, implementation, delivery, and handover of multi-billion-dollar projects. A specialist in FPSO, Turrets, Subsea, Topsides, Platform & Jackets, Auditing and Decommissioning. Defining input for FEED, evaluation, kick-off, qualification, procurement, project execution, risk management and mitigation, auditing, commissioning, package close out, handover, RFSU and Operations. Pragmatic yet technical in approach, while determining the safest, cost effective and compliant solutions. Proven in multiple Major and Mega Projects operating within Project Management and Executive Management Teams. Continuous Improvement for Projects and Decommissioning in unchartered territory and devising pioneering solutions. Focused on Quality, HSSE, Risk, strategy, process, management, and teamwork to achieve goals across multi-functional teams. Fully conversant with International Standards and worldwide Regulations, leading audits, investigations, and project teams across multiple tasks, internally and through contractor & supplier networks

Engineer, Manager, Other, Supervisor / Technician

Results-driven Rotating Equipment Engineer with extensive experience managing complex projects in LNG plants, gas processing and transmission, and petrochemical complexes, refineries, FPSOs, and offshore platforms. Well-versed in leading diverse teams through conceptual, FEED, detailed design, construction, installation and commissioning phases as a PMC and EPC lead engineer whilst managing budgets and cost time resources.

Engineer, Inspector

Bachelor’s Degree in Mechanical Engineering, with extensive experience in asset integrity and inspection. Certified as an API 510 Pressure Vessel Inspector and API 570 Piping Inspector, I bring a strong background in non-destructive testing (NDT) techniques. I am proficient in interpreting technical drawings and conducting thorough inspections of both offshore and onshore static equipment. My expertise includes evaluating the condition of static assets, recommending corrective actions, coordinating NDT activities, overseeing repair works, and compiling detailed reports using asset integrity management systems. Well-versed in international construction and inspection codes, including API and ASME standards, I am eager to apply my skills and knowledge to ensure the integrity and reliability of static equipment and structures within a dynamic engineering team. 

Inspector

I am an experienced Electrical Instrument Inspector with over 9 years of experience in the electrical field. Proficient in inspecting, testing, and maintaining a wide range of electrical instruments and equipment. Strong knowledge of electrical codes and regulations, as well as excellent problem-solving and communication skills. Committed to safety and quality workmanship I have had the opportunity to work on a variety of oil and gas projects. I have worked on multi-national teams and have experience communicating with contractors, engineers, and other professionals from different cultural backgrounds. I am well-versed in using inspection and testing equipment, and I am comfortable working in both indoor and outdoor environments. I am an excellent problem solver and am able to think critically and make sound decisions. I am a highly organized and detail-oriented professional. I am dedicated to ensuring the safety and compliance of all electrical systems and am always willing to go the extra mile to ensure the satisfaction of my clients. In summary, I am an experienced electrical Instrument inspector with a strong background in codes and regulations, extensive knowledge of electrical systems and components, and experience working on multi-national teams. I am dedicated to ensuring the safety and compliance of all electrical systems and am committed to providing excellent service to my clients.

Inspector, Supervisor / Technician

Offering my service in an organization of field jobs welding, fabrication, joining and inspection that enables me to fully utilize my knowledge, experience and skills in a position that requires an innovative and dynamic person to value-add to the company's vision, missions and core values.

Inspector, Supervisor / Technician

I have extensive experience and in-depth familiarity with Oil & Gas offshore fabrication and construction projects. My professional journey has been enriched through involvement in diverse projects, exposure to various construction disciplines, and collaboration in multinational and multicultural working environments. My career objective is to contribute as a representative and team member in an establish company, utilizing my skills and experience to archive project goals effectively and drive organizational success. Following with my general duties and responsibilities as a Construction Manager / Superintendent / Engineer. General duties and responsibilities  Understand, strategize, and coordinate the project construction scope and requirement on the project.  Liaise and coordinate with project stakeholders, including clients, discipline leads, department managers, engineers, subcontractors, and vendors to ensure seamless execution.  Enforce strict in site execution meeting project QHSE expectations, engineering requirements, and project specifications.  Delegate action, responsibilities, and define project deliverable requirements in terms of both scope and schedule to subordinates.  Supervise & guide subordinates and contractors, ensuring alignment with project goals and address construction challenges, resolve conflicts, and implement effective corrective active.  Track project milestones and prepare progress reports to managers and planning team. Present updates, heads-up risks, and recommend actions to maintain construction progress momentum.

Engineer, Manager, Superintendent

*Construction / Quality Controller / Mechanical Completion* Fabrication and erection of Jack up Drilling Rig, Offshore (Platform). Completely knowledgeable in Welding, HVAC, Piping, and Rotating and Static Equipment Installations. Various types of Testing during Mechanical Completion i.e. Pressure Test (pneumatic & hydro) on process piping, HVAC and testing for pre-commissioning.

Inspector, Engineer

With 10 years of experience working in Oil/Gas/Petrochemical/Refinery and Power Plant industry and focusing as an API Plant Inspector and highly competent in performing an inspection of static equipment such as Pressure vessel inspection (API 510) and Piping Inspection (API 570) including prefabrication welding works in the field of the oil & gas industry in Malaysia.

Engineer, Inspector

Thirty (30) years experiences in EPC Project, FEED Project and Engineering Blanket Service Project, Constructability study Project for onshore and offshore project as Quality Lead Engineer for several Oil & Gas, LNG, refining and petrochemical. The CCE (Certified Cost Engineer) certifications confirm project management knowledge and expertise, while ensuring improvement through mandatory recertification procedures. Have a complete professional experience and exposure. I have worked with equipment maker, engineering company, EPC Contractor and Project Owner. Currently has involved in EPC BP Tangguh Expansion Project LNG Plant. Specialties: QA, QC and project management in oil and gas industries.

Supervisor / Technician, Inspector, Manager, Engineer

    I am a young, energetic, well-motivated professional. I have excellent Technical skill and believe in participatory learning process and approach. I can maintain the technical matters relating to Mechanical, Civil, hydraulic and Industrial mechanics. I have done my work with Saudi Aramco & Dar Petroleum. I am having ability to function in a multicultural environment, to lead and motivate multinational teams and familiarity with cost management processes.  Assuring of my best services at all 

Inspector, Engineer, Supervisor / Technician

I have over 20 years of experience Occupational Health, Safety and Environment in Offshore & Onshore Rig environment, including more than 11 year's in  occupational health and safety, I bring a wealth of expertise in risk management, incident investigation, and compliance with HSE standards. I have actively contributed to improving workplace safety by conducting regular hazard assessments and implementing effective control measures. My efforts have consistently ensured compliance with industry standards and reduced incident rates. I would be honored to bring my skills and commitment to your team. Valid courses: OGUK, BOSIET, HUET, Seaman Book, OPITO H2S, IOSH.MS, NEBOSH, NVQ-Level 6.

Engineer

An Indonesian citizen and Malaysia RP-T (Residence Pass-Talent) holder. Expert in geotechnical engineering both onshore and offshore. Registered Professional Geotechnical Engineer in Indonesia (G-1) and Executive Professional Engineer (IPU). Have more than 25 years of extensive working experience as contractor, consultant and lecturer. Spent the last 19 years working in onshore and offshore geotechnics in oil and gas industry.

Manager, Engineer

Results-oriented QA/QC & Site Construction Field Supervision Professional with 10 years of combined experience in the oil & gas and wind farm industries. Demonstrated Expertise in leading cross-functional teams to achieve exceptional construction progress while maintaining an optimum quality standard. Skilled in Quality Assurance/Control Activities, structural fabrication, welding, quality auditing, project procedure development and risk management. Bachelor's Degree Holder with a total of 7 years overseas in Malaysia, Singapore, Brunei Darussalam (Kuala Belait) for working and studying purpose.

Manager, Superintendent, Supervisor / Technician