Mechanical engineer with 10+ years of experience in power generation industry mastering in asset management, engineering, power plant management, mechanical repair, mechanical equipment inspection, troubleshooting analysis, vibration analysis, alignment and balancing rotating equipment etc

Engineer, Supervisor / Technician

Experienced Executive with a demonstrated history of working in the Logistics and Supply Chain industry. Skilled in Negotiation, Transport Planning, Microsoft Office, and Management. Strong operations professional with a Bachelor's degree. Currently working on Allyn International for LLP Baker Hughes Malaysia.

Other

Highly organized and detail-oriented Document Controller with with 14 years of experience maintaining meticulous documentation systems. Proven record of identifying and implementing workflows to improve efficiencies and reduce costs. Skilled in various document management system, spreadsheet & word processing

Other

As a dynamic and results-driven Procurement Executive with over 8 years of experience in supply chain management, vendor negotiations, and procurement strategy development, I bring a proven track record of managing complex projects and delivering measurable results. Highlights of my expertise include: ·      Leading procurement for major projects, such as the EPCC of FPSO P-82 (Petrobras) and the EPC of an end-of-life plastic chemical recycling plant (Petronas Chemical Group). ·      Proficiency in ERP systems, contract management, and market analysis, enabling the optimization of costs and efficiency. ·      Successfully aligning procurement processes with organizational goals, ensuring seamless project execution. Since starting my career in 2010 after earning a BTEC HND in Mechanical Engineering, I have consistently demonstrated my ability to contribute to the success of complex and high-value projects. I am available to join your organization immediately upon selection and I am confident that my expertise and dedication will make me a valuable asset to your team. Thank you for considering my application. I look forward to the opportunity to discuss how I can contribute to your organization’s success.

Engineer, Other

Have experience as Associate Production Engineer E&I at McDermott for QatarEnergy LNG Module, review document, support installation after fabrication and helping construction team at field. Electrical Engineer RDMP Balikpapan JO, review SLD, LV and MV Switchgear, motor control center, cable route and tray for Pertamina Balikpapan Refinery Project. as Electrical Project Engineer at APRIL Group, Responsible for managing the team of contractor, Monitoring and Supervition, Handling Contractor, Daily check manpower. Previously as Electrical Inspection Engineering at Pertamina Refinery Unit II Dumai. I also participate in work activities in the field such as inspection, maintenance, meetings and commissioning that make me accustomed to discipline, working under pressure, individually or in teams.

Engineer

With over 20 years of design experience in Offshore/Onshore, Refinery, Petrochemical, Oil and Gas, and LNG projects. Being a member of the Structural/Civil Design team, the responsibility involves developing the strategy, planning, and delivery of corporate and client design needs. Resolved design issues and problems. Ensure that effective methods and design/engineering techniques are used. Provide technical and quality checking for drawings, Model and schedule. I can provide of structural drawings and details from conception to final design stage, according to standards and procedure in steel and concrete structures including foundation, pile, substructures and culvert civil works. I can collaborate and work with other discipline project team members to provide quality service to client to ensure that all deliverables conform to client and company standards. Proven ability to achieve targets and significantly with quality. Results oriented, motivated and focused on client satisfaction.

Drafter / Designer, Supervisor / Technician

I am a highly skilled, precise, and energetic project and operation manager in power, renewable energy, utilities, telecommunications, facilities and asset management, oil and gas and business planning with over 10 years of invaluable experience in successfully overseeing and completing construction projects, maintaining, managing power assets business development with a proven track record of constantly increasing operations efficiency, decreasing operational cost, and cutting lead times. Always exceeding company output numbers and excellent quality control. Also, committed to working safely by following all proper procedures and local regulations. Results-driven operations with cognitive experience in optimizing business processes, improving efficiency, and driving operational excellence. Adept at developing and implementing strategic initiatives to enhance productivity and streamline operations. Seeking a challenging position to leverage my skills in leadership, process improvement, and team collaboration. The attached curriculum vitae provides a more detailed description of my achievements, education, interests, and work experience. I thank you for your time and expectantly wait to hear a positive response from you. Best regards, Muhammed Abdulkareem Idachaba

Manager, Inspector, Engineer, Superintendent

I am a versatile person who can offer professional help to your business. You can count on both my 3D modeling and 2D drawing skills. I have a knack for understanding project execution and workflow related to design activities for both brownfield and greenfield front-end engineering. I have strong working experience in detailed engineering projects in the oil and gas and mining industry using different software tools.

Drafter / Designer

Communication skills, a results-driven approach and a well-organized team-player. I’m sociable, self- educating, flexible and ready for business trips. Have a sense of time & able to perform work under pressure. Ready to take on higher responsibilities as required by management

Engineer, Inspector, Manager, Supervisor / Technician

Electrical and instrumentation technician specialist in commissioning and start-up.

Supervisor / Technician

Meet Suhaimi, an experienced professional in oil and gas industry with over 25 years of experience. Working in various facilities such as FPSOs, Central Processing Facilities, and Steam Cracker Plant. Throughout his career, Suhaimi has had opportunity to work with variety of companies, including fabricators, Hook-up and commissioning contractors, EPC contractors, OEM vendors, and Field Operator Companies. Suhaimi specializes in commissioning rotating equipment from a variety of leading brands such as Solar Turbines, Rolls-Royce, Dresser-Rand, GE, and Mitsubishi. He has extensive experience in developing commissioning procedures, executing commissioning activities, conducting endurance tests, and handing over facilities to clients. Suhaimi has worked on both green and brownfield projects, and has experience on international projects such as FPSO Ruby II in Vietnam, Gas Booster Compressor Station in Uzbekistan, and the LNG plant in Papua New Guinea.

Engineer

With seven years of dedicated experience in instrumentation design and engineering, I am committed to delivering high-quality and innovative solutions for both brownfield and greenfield projects within the oil and gas sector. My work with esteemed clients such as Shell, ExxonMobil, Petronas, Equinor, and Evonik has consistently met project requirements and often exceeded expectations. My expertise encompasses a comprehensive range of competencies, including the preparation of instrumentation documents, design drawing reviews, technical bid evaluations, and vendor data assessments. Proficient in utilizing industry-standard software tools like INtools, AutoCAD, MS Office, and SAP, I support the intricate design and engineering processes of instrumentation systems. Additionally, my hands-on approach is demonstrated through regular site visits for the verification and assessment of both onshore and offshore facilities. As a registered engineer with the Board of Engineering Malaysia (BEM), I am not only committed to upholding the highest standards of engineering practice but also to continuous learning. This dedication to professional growth ensures that I remain at the forefront of new technologies and techniques, thereby adding value to the projects I undertake and to the clients I serve.With seven years of dedicated experience in instrumentation design and engineering, I am committed to delivering high-quality and innovative solutions for both brownfield and greenfield projects within the oil and gas sector. My work with esteemed clients such as Shell, ExxonMobil, Petronas, Equinor, and Evonik has consistently met project requirements and often exceeded expectations. My expertise encompasses a comprehensive range of competencies, including the preparation of instrumentation documents, design drawing reviews, technical bid evaluations, and vendor data assessments. Proficient in utilizing industry-standard software tools like INtools, AutoCAD, MS Office, and SAP, I support the intricate design and engineering processes of instrumentation systems. Additionally, my hands-on approach is demonstrated through regular site visits for the verification and assessment of both onshore and offshore facilities. As a registered engineer with the Board of Engineering Malaysia (BEM), I am not only committed to upholding the highest standards of engineering practice but also to continuous learning. This dedication to professional growth ensures that I remain at the forefront of new technologies and techniques, thereby adding value to the projects I undertake and to the clients I serve.

Engineer

I starting my job as R&D for 9 months atau PT. Jindal Stainless Indonesia a manufacturing company producing stainless steel sheet, I lead project research about behavior low tempered rolling stainless steel. After completing the project, I accept offer to work as Piping Engineer in an EPC company, PT. Gunanusa Utama Fabricators for more than 4 years, joining Yadana Subsidence Project for Total E&P Myanmar. Starting from creating material take-off, Fabrication spool and pre-commisioning, until conducting SIMOPS during tie-in and completion of commisioning on Yadana Offshore, Myanmar. After the project, I received offer from PT. Sepuluh Sumber Anugerah (EPC company) as Field Engineer for short term contract for bidding in 176 KM linepipe project. Currently, I work as Quality Assurance supervisor in PT. Citratubindo, a manufacturing company for OCTG products. I lead my team to ensure the plant operation following QMS API Q1 and ISO9001, and the product comply with customer requirement. I have conducting 14 times audit as internal Auditor QMS ISO19011, 8 times interface with API audit, and more than 10 times customers audit (Aramco, Adnoc, Total, Pertamina, etc). I also have conducting 2 times audit as internal Auditor ISO45001 for safety management system. My experience and interest consists of Quality Management System, Piping construction, Project Management, Corrosion, Safety and Root Cause Analysis.

Engineer, Supervisor / Technician

With over a decade immersed in geophysics, I specialize in transforming seismic data into valuable insights for oil and gas exploration. My proficiency in seismic interpretation and uncertainty analysis drives the development of accurate geological models, essential for identifying potential reservoirs. My attention to detail and ability to work effectively in a team have helped me to consistently deliver accurate and timely results.

Engineer

A highly motivated professional committed to continuous learning and growth, aiming to advance a career across diverse industries through the acquisition of relevant licenses and certifications. Thrives on challenges and aspires to become a distinguished electrical and instrument engineer, leveraging skills and passion to drive success.

Engineer

I am a Mechanical Engineer with over 19 years of experience working as a Static Equipment Engineer for EPC firms and equipment vendor. I have been involved in Front End Engineering Design and detailed design works for static and package equipment for oil, gas, refinery, petrochemical and chemical plants. I have excellent attention to detail and ability to complete essential duties and responsibilities in an efficient and timely manner. I am knowledgeable in Solidworks, AutoCAD operation, MS Office application, pressure vessel calculation software (Compress) and mechanical calculations.

Engineer, Drafter / Designer

Muhammad Syukri is a highly experienced Oil & Gas engineering consultant with over 13 years of expertise in engineering design for offshore and onshore projects. Since joining Perunding Ranhill Worley in November 2019, he has played a key role in various projects, including FPSO and Carbon Capture & Storage (CCS) developments. Notably, he served as the Lead Piping Stress Engineer for the Kasawari CCS and Lang Lebah CPP projects. He has extensive knowledge of industry standards, including ASME, API, and client-specific requirements such as EMEPMI (GS, GP), PTS, PMRC, DEP, MLNG, PEGS, and Qatar Energy Std. His experience spans Conceptual Studies, Front-End Engineering Design (FEED), Detailed Design, and Engineering, Procurement, Construction, Installation, and Commissioning (EPCIC) contracts, covering both Greenfield and Brownfield projects. With a strong technical background and a proven track record of success, Muhammad Syukri is well-equipped to contribute effectively to any engineering team in the O&G industry.

Engineer

I am a NBOSH certified HSE professional with over 20 years of diverse background.

Manager, Superintendent, Supervisor / Technician

Piping Material Engineer with about 13.5 years experiences, including 2.5 years overseas experiences, as Piping Material Engineer at EPC Company. Having involved in some projects for: Proposal, Feasibility Study (FS), FEED, Detail Engineering, Turn Around (TA), and EPC projects. Familiar with Engineering Code and Standard related with Piping Material. Having experience in SmartPlan Material & SmartPlan Instrument software as Operator. Have willingness, hard worker, good team player, quick learner, and having passion in Piping.

Engineer

Logistics Executive experienced in international freight and inventory management. Performance and goal driven to ensure fast, accurate, reliable delivery and supply of materials and resources. Good understanding in import & export arrangement and Malaysian Customs rules and regulations

Other, Superintendent

I am a piping designer with more than 10 years of experience, and I can operate software SP3D, AVEVA E3D and AVEVA PDMS

Drafter / Designer

Bachelor of Applied Engineering (Sarjana Terapan Teknik) as Piping Engineering from Shipbuilding Institute of Polytechnic Surabaya. Have been around 3 years professional experience on several EPC and Consultant Engineering for Feasibility Study, Front End Engineering Desain, Detail Engineering Design and Construction on Brownfield and Greenfield. 

Engineer

An electrical engineer with over fourteen years of experience.

Drafter / Designer

Experienced Piping material engineer having 18+ years of experience. Responsibilities include working as Lead Piping Material Engineer and Deputy Piping lead

Engineer

Experienced safety professional with a 12-year track record in HSE, risk management, and regulatory compliance. Proven tracked record in management, data analysis, problem-solving, and communication. I am a certified Tripod Beta Silver Accident Investigator with expertise in accident investigation and safety management. My additional certifications in ISO 31000 Risk Management, OGP 423, Assurance Delivery Excellence, BOSIET, Business Continuity Management demonstrate my commitment to quality, safety, risk mitigation, and business resilience.

Other