Drilling freelance

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

The most potential in Quality Health Safety and Environment position starting with Field Executor until Management which have direct roles to the operation of Oil & Gas companies either International or National scale such as: PTTEP-MOGE Myanmar, Pertamina Refinery Unit V, Pertamina Hulu Kalimantan Timur (PHKT), Arabian Gulf Oil Company (AGOCO), British Petroleum, Total EP Indonesia, ExxonMobil, Chevron Indonesia Company, Virginia Indonesia Oil Company (VICO), PTTEP Thailand, Pertamina EP and Medco Energy as well as Weatherford and Scomi Oiltools as Service Company that have enriched acknowledgement of QHSE ethics, codes and standards from their daily basis through various levels (Officer, Supervisor, until Manager). For over 20 years overall period of working experiences that initiated from non-technical works, by will and opportunity, made me become involved in this technical function on Oil & Gas Operation and Exploration either Constructions or Development Projects.

Supervisor / Technician, Superintendent

Accomplished logistics professional with over 30 years of experience in logistics operations within the Oil & Gas industry. Specializing in project logistics for ECPI, and T&I contracts across various regions, including ASEAN, Middle East, and Africa. Proven track record in cost optimization, efficient planning, and successful project execution. Strong global network and expertise in leading cross-functional teams to deliver projects on time and within budget. 

Manager

I am a registered industrial engineer living in Spain, with an intensification in structural/mechanical engineering. After a short initial stint working for a local engineering company, I have developed most of my professional career as a freelancing, consulting engineer working for customers in Norway and Scotland, in the oil & gas and maritime sectors. My main area of expertise is the development of modular mechanical packages and other mechanically functioning equipment. I have acted as both project manager and product delivery responsible in integrated scopes of supply comprising both engineering, procurement, and construction.

Engineer

Hi, I’m Mohamed. Fifteen years of experience in Petrophysics, Geological Operations, and Geological Studies. Seeking a Job opportunity in a well-established company with an environment that will challenge and enhance professionally both my knowledge and work experience in petroleum engineering.

Engineer, Other, Supervisor / Technician

Material Management, Logistic, Procurement & Contract   Supply Chain Management- Materials Management, Logistics, Procurement, Contract. I have 22 years strong knowledge in Supply Chain Management with (PSC) Major Operator company (Shell, Exxonmobil) in Oil & Gas industry, Semiconductor Tools Install Construction.   25 years of Oil & Gas experiences, 22 years in Supply Chain Management > Contract & Procurement Engineering, Materials Management - BOM Cataloguing, Logistical Management for ; -  Rejuvenation Project Team, construction, Maintenance & Drilling, both Upstream, Downstream and Mining Minerals, Operation Equipment's Maintenance, Semiconductor- Tools Install Construction (Intel Technologies) and Construction HUC.     20 years of experiences, I am involving in International Project 12 Mega Rejuvenations Construction & Fabrication Topside, LQ – Living Quarters & Jackets Project, From Procurement & Materials BOM to Support the Maintenance team for Production Platform & Refineries, EPCC Refineries Construction Projects, Intel Technologies Construction project, 16 Wells in Drilling Campaign Projects in Malaysia, also the regional campaign & project, 4 Wells with SPEX (SHELL) Philippines, Mining in South Africa, Brazil, From Procurement & Materials to support Major Equipment's Maintenance at Al Hons Gas, Abu Dhabi, UAE, and liaise with others International Manufacturer and vendors Companies across the countries. Supply Chain Management with emphasis on Leading team for Material Management for BOM Plant Maintenance & Cataloguing, SAP MM, WMS, SCM & PM, Maximo MM, WMS, SCM & PM, Materials MTO for construction, Logistics shipment & airfreight in Custom liaison, Procurements costing estimation, planning strategy, Lead team in Base, Materials BOM verification specification & Materials QA/QC inspection & FAT (Factory Acceptance Test), Tendering, Bidding and Contract Committee/Panel - Contract negotiation spare part, Piping, Structure, E&I, Mechanical Static & Rotating maintenance materials planning, Drilling Material & Equipment, Material Tracking. Providing materials services, CMMS, BOM Cataloguing and Asset Material Registration in Plant Maintenance AND using the Petronas Inventory PTCAM & PPGUA. MESC, SWECs CODE standards

Engineer, Manager, Other

I am Dair Djuwari Ngadenan experiences in drilling as Chief Mechanic more than 15 years

Supervisor / Technician

Mud Logger by completing the studies in petroleum geochemistry, geoscience, and chemical analysis competently. Passionate about drilling operation and formation analysis with a knowledge of the gas analysis and processes to the target zone identification of hydrocarbon. Proficient in reporting and monitoring the drilling activities to the clients and other engineers. Deft for utilizing sophisticated gas analysis and drilling sensors to maximize the upstream projects for the sustainability of the energy efficiently.

Engineer

I am Assistant Driller with 7.3 years of offshore experience in drilling and workover

Other

 I am Cost and Performance Engineer with experience in Completion and Well Intervention Engineering within Shell. Before Shell I was working on the "other side" of the business - service company (Schlumberger), where I obtained knowledge and skills in Coiled Tubing and Cementing Engineering. In general, I hold strong professional skills in HSE auditing, Oil & Gas, Coiled tubing, Stimulation, Downhole Tools, Cementing, Slickline, Well Testing, Well Intervention, and Cost and Performance management.

Engineer

I have 9 years of experience in specific roles such as Drilling Supervisor and Project & Drilling Engineer in both onshore and deepwater offshore Oil & Gas projects. My professional background includes significant experience in drilling wells up to 3000 meters depth using 1200-2000 HP onshore drilling rigs and 6th and 7th generation deepwater offshore drillships in water depths up to 2400 meters.   Throughout my career, I have successfully supervised all phases of drilling operations on site such as vertical and horizontal (S & J type) well drilling including drilling with well loss, casing running and cementing, well logging, MDT and post-drilling operations such as running completion string, nitrogen lifting with coil tubing and well flow testing. My experience includes the application of advanced drilling technologies such as Managed Pressure Drilling (MPD), Rotary Steerable Systems (RSS), Rhino reamers, and hole openers, which I have utilized in onshore and offshore wells to improve wellbore placement, reduce drilling time, and ensure more efficient drilling operations. In addition to that, I have also supervised specific unusual drilling activities such as fishing, stuck pipe, back-off, sidetracking, casing cut and pull.   Moreover, I am experienced in preparing drilling program, work instruction/procedure, well summary, well profile, daily drilling report, cost report and end of well report. I have ability to use industry standard software such as OpenWells and Wellplan.

Luis Antonio, is a motivated, energetic, accomplished professional with extensive experience in the upstream oil and gas: Drilling, Workover, Completion, P&A Wells Projects and Decommissioning Well Operations as well. Determined and Decisive; Uses Initiative to Develop Effective Solutions to Problems and Provide Technical Support to Resolve Challenges of the Well Engineering Planning-Design, and Rig/Well-Site Operational Support. Results-Driven, Logical and Methodical Approach to

Engineer

A mechanical engineering graduate seeking career opportunities as a field engineer in the upstream oil and gas industry. Equipped with a quick ability to solve problems, able to adapt to new systems and multitask under intense pressure. Keen to learn and contribute to a company's growth by adopting leadership skills and current international working experience.

Engineer

Over 20 years’ experience in the industry which will allow me to use my skills in the fields of Occupational Health, Safety and Environment to provide proactive HSE. It ranges from facilities management and oil & gas' upstream as well as downstream activities such as geophysical, seismic, exploration and drilling, marine transportation, and installation, EPCC, Automotive industries, Renewable energy and Train the Trainer.

Manager, Engineer, Inspector, Superintendent

I have over 20 years of experience Occupational Health, Safety and Environment in Offshore & Onshore Rig environment, including more than 11 year's in  occupational health and safety, I bring a wealth of expertise in risk management, incident investigation, and compliance with HSE standards. I have actively contributed to improving workplace safety by conducting regular hazard assessments and implementing effective control measures. My efforts have consistently ensured compliance with industry standards and reduced incident rates. I would be honored to bring my skills and commitment to your team. Valid courses: OGUK, BOSIET, HUET, Seaman Book, OPITO H2S, IOSH.MS, NEBOSH, NVQ-Level 6.

Engineer

·  Adept in working with multinational crews and delivering outstanding performances. ·  Well versed in managing safety & housekeeping standards in work areas. 1. ·  Dedicated drilling professional skilled in working under pressure with sound communication, coordination planning & execution skills.

Supervisor / Technician

I have with more than 10 years work experience in Health Safety and Environment Department In Onshore & Offshore field such in Drilling & Completion campaign, Oil & Gas Fabrication , Spool Base subsea pipe line, Subsea equipment Fabrication, Marine services and Maintanance, Port & Logistic, Civil & Earth Work construction and CPO Refinery Construction. I am undertake a challenging career opportunity in Occupational Health & Safety where I can utilise my broad training and skills. Willing to be place in remote area and able to complated tasks and responsibilities. Healthy physically, energetic, able to work in team or individual, friendly and like challenge, fast learning with new enviromental.

Supervisor / Technician, Inspector, Engineer

Being a Petroleum Engineer working as HSE Specialist in Sanad.KSA More than 13 plus years experienced in Drilling, work over and Rig less activities Nebosh IGC, T-Bosiet & H2S, Lead Auditor QMS 9001, OHSMA 45001, IWCF sup. Level,& other necessary certifications.

Supervisor / Technician, Other, Engineer

Skilled Bachelor of Geologist professional with over 17 years of experiencein Oil and Gas industry. Working in all stages of geologist roles such as Exploration, Development, Production, and Operation. Possess exceptional interpersonal, communication skills and is highly creative; combines strong knowledge of geological interpretation and operation to understand the relationship between the data integrity and acquisition for further analysis purposes.

A graduated engineer of Oil and Gas Engineering at UiTM Shah Alam | Experienced in several projects related to project planning, project management, sustainability, project design, well drilling and exploration, and subsurface development | Skilled in several engineering software such as QUE$TOR, AutoCAD, MATLAB and Petrel | Skilled in several Microsoft software such as Words, Excel, Power Point, Project, Visio, and Power BI | Indulge in volunteering activities and several sports | Engaged in leadership, excellent communication, wise time-management and teamwork | Open and searching for new experiences and up to any challenges and task.

Engineer

Bachelor's degree of geological engineering from Gorontalo State University who are very interested and understand of geological science. Experienced ±2 years managing various stages and projects of exploration especially for gold, nickel and iron ore comodities. Able to carry out various geological methods (Grab Sampling, Handauger, Stream Sediment, Geological Mapping, Soil Sampling, Grid  Sampling, Core Drilling, Core Logging, Anaconda Mapping) and supervise of geophysical surveys  (Groundmagnetic and Geoelectric). Good mastery of GIS software (ArcGIS, Google Earth, Global Mapper, SAS Planet, Garmin BaseCamp, MapSource) and several geological software (DIPS, Surfer, Geomatica, RES2DINV). Well familiar with Porphyry Cu-Au, epithermal (HS-LS), skarn and nickel laterite deposits system. I am interested in discovery, study, and writing of geological resources, especially in work related to mineral, oil and gas.

Engineer

I work as Chief Rig Mechanic With 15 years of experience working in all stages of oil and gas field evaluation and development, their goal is to search for hydrocarbons in the most effective way and solve any operational problems. I can also be responsible for using drilling tools and techniques and getting the most out of old or poorly performing wells during the entire extraction process. It also reduces the impact of drilling on the environment and ensures compliance with environmental protection laws

Competent, inspired, active & consummate professional with extensive upstream-experience of oil and gas industry; proven track record of developing and executing drilling, workover, completion, plugged-dismantling-abandonment wells-structures process & programs; conducting comprehensive cost-time analysis & work teams managing. Recognized ability to manage the projects from start to the end, include but not limited the daily rig activities support for the execution of the operations, HSE practices-protocols & implementing the regulations; supply chain support; scheduling of maintenance, mobilization & installation of the rigs and for the required services suppliers', personnel issues as well. Enthusiastic to train engineering staff, to resolve any matter that may arise or impact the timely and profitable achievement of projects.

Engineer, Manager

I have 25 years experiences on drilling project as material and logistic coordinator. I have support many project both offshore and onshore. I am 47 years old and ready to mobilize immediately.

Superintendent, Other

With over 9 years of oil and gas industry. I am highly adapt at petroleum engineering, workover well service operation, production operation. My career highlight includes oil and gas production performance and ensuring of flow quantity assurance complience

Engineer