Construction freelance

Over 18 years of experience working on oil & gas and petrochemical projects. Experience in quality inspection and fabrication/construction of onshore & offshore fabrication and installation, subsea equipment such as Submerged Swivel and Yoke (SSY), Subsea Production System (SPS) and Subsea Umbilical Riser Flowline (SURF), Engineering, Procurement, Construction and Installation (EPCI), vendor inspection, expeditor, and mechanical. Supervised during the fabrication phase, mechanical completion & flange management, testing, FAT, EFAT, and SIT for subsea equipment, preservation, and load-out activity. Supervised offshore & subsea installation work such as pipelines, risers, flexible pipes, umbilical, SIMOP/brownfield, greenfield, and shut-down work at refineries and FPSO/FPU. Generate deliverables quality documents such as Project Quality Plan (PQP) and Inspection and Test plan (ITP) are used to achieve revenue quality performance/targets based on KPI, audits, NCR, etc. Proficient in mechanical, welding, piping, structural, NDT & coating inspections, including materials & consumables, mechanical lab tests, weld process, weld overlay cladding, and problem-solving.

Engineer, Inspector, Supervisor / Technician, Other

Graduate of Bachelor of Science in Electronics & Communication Engineer with the following skill summary. Continuous experience in FEED, Detail Design Engineering, Construction & Commissioning of Greenfield and Brownfield projects for Oil & Gas, Petrochemical, Power and Telecommunication industry. Specializing in Instrumentation & Control which requires both knowledge of industry practices/standards, and the ability to use computer software for preparing deliverables. Has knowledge in conventional instruments, Foundation Fieldbus, DCS, SIS, F&G, Electrical and Telecom systems. Work experience includes; Commissioning Engineer (Pre-Comm/Comm), Engineering Support for Construction, Design Engineer/Designer, Checker for Design Deliverables. Provide Technical assistance in Instrumentation & Automation and Telecom device installation, mechanical completion testing, precommissioning, commissioning and troubleshooting. Factory Acceptance Test and Site Acceptance Test of DCS, FGS, SIS and Vendor Packages. Subcon/vendor document review and coordination during construction. Additional experience includes involvement in project management, scheduling and procurement.

Engineer, Drafter / Designer

Knowledgeable and proficient Senior Project Manager with 20+ years managing and overseeing construction projects. Possess strong leadership and communication skills and effectively liaises with various teams and business partners to develop project outlines and meet business objectives while building rapport. Executes projects with safety at forefront of all operations and maintains up-to-date knowledge of statutory and compliance regulations while upholding business standards and meeting target timelines.

Manager

Experienced Piping Engineer with a demonstrated history of working in the oil & energy industry. Professionally skilled in Piping Layout and Design, 3D modeling, AutoCAD, Construction, Engineering both Greenfield and Brownfield Projects and Project Management.

Drafter / Designer, Engineer

 I'm Nino Nieves, a Filipino. With over 18 years of extensive experience in the erection, commissioning, and implementation of instrumentation systems across diverse industries, I am confident in ensuring optimal performance and reliability of complex systems. My strong background in project management and technical execution positions me to make significant contributions to your team and drive successful project outcomes. Throughout my career, I have led numerous projects that demanded a comprehensive understanding of instrumentation and control systems. I have expertly managed the installation and commissioning of advanced instrumentation equipment, consistently ensuring compliance with industry standards and regulations. My proficiency in data acquisition, process control, and system integration has enabled me to troubleshoot effectively and optimize processes, resulting in enhanced efficiency and minimal downtime. Beyond my technical skills, I excel as a proactive communicator and collaborator. I have forged strong partnerships with multidisciplinary teams, including engineers, technicians, and clients, to deliver projects on time and within budget. My ability to articulate complex technical concepts has fostered productive working relationships and facilitated successful project execution.

Engineer, Inspector, Manager, Superintendent, Supervisor / Technician

Over 19 years of wide-range and multi-functional experience in Piping Design and Engineering. From FEED to Detail Design, to Construction and to Pre-Commissioning/Commissioning phase of a project, both greenfield and brownfield. Majority of experiences were involvement in Design and Build Projects in different industries such as Oil&Gas, Petrochemical, Refineries, Pharmaceutical, FPSO, Mining and Waters. Comprehensive knowledge of applicable Piping codes and standards. Actual involvement in Piping/Pipeline checking and site walkdowns including preparation and clearing/monitoring of punch list items. Broad experience in production of high-quality engineering deliverables such as P&ID, Isometric drawings, Fabrication drawings, General Arrangement drawings and Detail drawings using Spoolgen, AutoCAD and Microstation. Hands-on experience in extraction of Piping Material Take-Off both from 3D models and/or from 2D reference drawings. Extensive experience in utilization of 3D software, both modelling and basic administration, such as AP3D, S3D, PDS, E3D, PDMS, Plantspace, CADworkx, Navisworks and SPR. Experience in Piping Material Selection and development of Piping Material Specifications. Hands-on involvement in design calculations such as Pressure-Temperature rating, Pipe wall thickness and Temporary test blind thickness. Hands-on involvement in Technical Bid Evaluation and preparation of Material Requisition for Piping items. Hands-on involvement in preparation of datasheets for Piping items. Experience in Pipe Stress Analysis by CAESAR II including report interpretation and evaluation. Actual participation in constructability and design reviews, HAZOPs, and Clients / other stakeholders’ coordination meetings.

Drafter / Designer, Engineer, Supervisor / Technician

Since 2018 In Oil & Gas Industries: 5 years experienced in EPCC / EPCIC. 1. Baram Bravo Reinstatement Project HUC EPCIC 2. Baram South Redevelopment Project HUC EPCIC 3. Bokor-A Make Safe Project HUC EPCC 4. Bokor BODP-E Bokor phase 3 Preservation HUC EPCC 5. SK408W Jerun Development Project EPCIC 6. Tennet 2G Programme Ijmuiden Ver Alpha Offshore Wind Farm EPC 7. Integrated Bekok Oil: Tiong-A, Bekok-A, Bekok-AA, Bekok-BB & Bekok-C Execution HUC EPCIC 8. Module 9 for Integrated Bekok Oil Project PCC

Engineer

Civil/Structure Engineer with 10+ years of experience designing and managing projects for a variety of clients from FEED stage, DED stage, construction stage, pre-commissioning stage, until mechanical completion. Skilled in leading teams and resolving technical issues. Create a positive and productive work environment by communicating with team members and interdisciplinary to mitigate potential concerns.   Provide structural analysis following design basis such as structural building, non-structural building, or non-structural component building and designed in accordance with codes or specifications. In charge of developing and preparing general specifications and construction specifications for civil structures and buildings. Generate the engineering concept, work volume breakdown, specification, and schedule during the FEED (Front End Engineering Design) stage.   Review Material Approval Request proposed by subcontractor to meet general and construction specifications, including following up on the delivery schedule of material. Assist the proposal team with requests for quotations for commercial purposes. Coordinate and identify technical queries, deviations, and alternatives to be submitted by the subcontractor. Prepare and coordinate with the QC Department for the ITR or inspection check list. Perform functional tests of indoor firefighting systems, for instance, one of the completion requirements before handover to the client

Engineer

25 years of professional experience on various projects in various environments, mainly Petrochemical, Oil and Gas, Offshore & Onshore, Mining and Infrastructure including detailing, producing general arrangements drawings for concrete and steel structures, pipe supports, pipe racks, pipe bridge, vessel skids, vessel supports, pilings, foundations, water retaining structures, MTO and most associated aspects of work. Also produced Reinforced Concrete details and structural fabrication drawings for the various elements associated with the above and heavy industrial engineering. Work carried out has been produced in the design office and plant based environment using the latest CAD softwares. Perform site surveys and inspection.

Drafter / Designer

Having work as a Senior Instrument Designer/Engineer, my experience has thoroughly prepared for the role Instrument Engineer Firstly, my in-depth knowledge of creating detailed designs for instrumentation layouts, design & Engineering has laid a strong foundation in meeting complex engineering specifications, crucial for the role you are offering. Secondly, I have honored my skills in utilizing advanced design software to produce high-quality schematics and layouts, ensuring precision and efficiency in the project execution. Lastly, my leadership role allowed me to work closely with cross-functional teams including electrical, mechanical, piping and civil engineers, enhancing my ability to collaborate and ensure cohesive project development.

Engineer, Drafter / Designer, Supervisor / Technician

Bachelor’s degree professional with over 15 year’s profile of generation top quality work performance and delivering successful results within lively business scenarios. Proven expertise in handling overall supply chain management, operation and marine with EPCC fabrication and manufacturing background. Possess exceptional negotiation, admirable client convincing and excellent communication skills. Keenly interested to explore a more challenging work profile to utilize gained experience and developed expertise and leadership attributes.  Highly motivated, versatile and workaholic . With over 10 years experienced in the Supply Chain Management which includes from Tendering, Procurement, Logistics & Warehousing process. Delivering the task base on the timeline or schedule given with zero LTI. Passionate about empowering people to work towards their potential.   

Manager

I am active and dynamic, trustworthy, able to work individually or in teamwork, self-motivated, initiative, and willing to work smart. My experience working at Eni Indonesia Muara Bakau BV on The Floating Production Unit Jangkrik at Makassar strait. My previous work with LNG project at Joint Operating Chiyoda Saipem Tripatra SAE on Tangguh LNG Train 3 Expansion Project as an S3D Piping Design Engineer. I believe that my educational background and experience as well as my abilities and skills could accommodate your needs and would be an asset to your company.

Drafter / Designer, Engineer

I am an Instrument & Control Engineer with 4 years total experience. I have experience at proposal phase from start-up / operation and maintenance phase. I am able to build, design and calculate equipment that relate to instrumentation and control such as gauge and transmitter, control valve and on-off valve, PLC and DCS include in build flowchart process to execution phase. I can work with thigh schedule and high pressure condition. If possible with my schedule,I can witness and doing FAT and Commissioning, Please do not hesitate to contact me for more information

Engineer

I'm very well experience in design engineering and project execution types of projects.

Engineer, Drafter / Designer, Superintendent

Accomplished Senior Instrumentation and Control Systems Engineer with over 15 years of experience executing and leading diverse EPC projects, including, Oil & Gas, Water Treatment Facilities, and Infrastructure projects. Skilled in translating project strategies into detailed execution plans, and procedures. Demonstrated leadership abilities in delivering small-scale to large-scale projects domestically and internationally. Expertise spans proposal, execution, automation, control, analyzer, and fiscal metering systems

Engineer

I am experienced engineer with a diverse background, I possess the skills and knowledge gained throughout my career. I have gained extensive experience in a variety of engineering fields in Oil&Gas onshore and offshore projects, Petrochemical, Nuclear, Shipbuilding sectors. I have worked for many companies and in many countries, which has allowed me to gain a unique perspective on engineering practices and processes. I am proficient in 2D/3D modelling and calculation software, and have experience in engineering design and field construction. I have consistently delivered high-quality results, and have been recognized for my ability to think creatively and strategically, to find innovative solutions to complex challenges. In addition to my technical skills, I possess excellent communication and interpersonal skills, which have allowed me to work effectively with colleagues, clients, and stakeholders at all levels. I am self-motivated and able to work independently, as well as be part of a team. I am a strong problem-solver, and I am able to think creatively and strategically to find innovative solutions to complex challenges.

Engineer

Leverage my technical acumen in Civil Engineering industry combines with Project Management skills to drive efficacious projects; unwavering focus on quality, safety, timely completion and sustainability standards. In a dynamic and collaborative work environment, I aspire to be a driving force behind the successful realization of projects, fostering an atmosphere of innovation, teamwork and continual improvement.

Engineer, Inspector

I am Gourab Das Civil Engineer looking for suitable opening.I am sending my updated resume.kindly find the attachment.

Proficient in cross-functional leadership roles throughout the FPSO product lifecycle, encompassing project initiation, construction, mechanical completion, commissioning, testing, client pre-acceptance, first oil & client validation, ongoing operations, and brownfield offshore project management.  I Master Mariner, PMP ongoing with 29 years of experience across leadership roles in EPCI projects in shipyards as well as offshore, marine construction, conversion & topsides integration, offshore operations, ship management, drydocking, and ship operations.  Marine Construction and EPCI:  ·      Led projects as brownfield Offshore Project Manager, Deputy Construction Manager, Site Manager, and Marine Superintendent for FPSO hull repairs, conversions, and topside integration.  ·      Technical & Operational Management: Extensive hands-on experience in vessel inspections, condition assessments, and maintenance planning, ensuring operational readiness and minimizing downtime. Familiar with contracts and charters to assess critical systems' operational conditions. ·      Compliance & Regulatory Oversight: Expertise in ISM implementation, internal audits, and preparing vessels for surveys and external audits. Led initiatives to ensure alignment with evolving marine legislation and industry standards. ·      Offshore & Marine Projects: Led structural repairs and tank conversions on operational FPSOs, collaborating with stakeholders to ensure safety and efficiency without disrupting production. Experience in new-build FPSO commissioning, moorings, riser pull-ins, and operational readiness. ·      Fleet & Asset Management: Proficient in overseeing vessel takeovers, flag transitions, and ensuring compliance with Oil Major requirements. Skilled in risk mitigation, system evaluations, and implementing lessons learned to enhance operational efficiency. ·      Team Leadership & Stakeholder Engagement: Demonstrated ability to lead multi-disciplinary teams across geographies, fostering collaboration between technical, operational, and regulatory stakeholders.   Project Management: EPCI Brownfield Project Manager, (MODEC), Deputy cConstruction manager for EPCI FPSO hull repairs, conversion & top sides Integration Management: Held leadership roles as Marine Superintendent, Deputy DPA.  Ship Operations: Extensive experience as Master in ship operations out at sea managing VLCC’s and all tanker types, including shuttle tankers.   I have worked in diverse environments in offshore operations, office-based roles, project sites, and sail/towage activities. My contributions during project phase in engineering, equipment selection, piping layouts, and equipment upgrades have been consistently recognized and appreciated by senior management. These efforts have led to improvements in project schedules, cost reduction, and operational efficiency. Operations & Offshore Have extensive experience in conducting FPSO marine equipment performance testing, hull integrity assessments, arrival preparations, mooring, and first oil operations. My expertise includes overseeing the startup and ensuring the operational readiness of FPSOs. I have led the planning, development of operational procedures, and execution of key activities such as mooring, riser pull-in, first oil production, bunkering, and offloading.   The operational procedures and safety practices established during these initial phases of operations have been continued and sustained over the subsequent eight years of continuous operations. Participated in the pre-operations team for new hull construction in Japan and integration at a Singapore shipyard. Led hull acceptance sea trials, hull and marine integrity tests, and class acceptance, ensuring readiness for sailing to the Singapore integration yard. Oversaw the startup of all marine equipment, from final loop testing to cold operation checks. Played a key role in the FPSO pre-acceptance process for all marine systems by Petrobras. Managed the operations and testing of marine equipment, including pumps and pipelines, during the transit. EPCI , Shipyards My expertise includes directing complex flare tower repairs and converting voids to ballast tanks on an operational FPSO without shutdown as offshore project manager. In shipyard environments, have coordinated engineering and construction processes to meet hull strengthening requirements for topsides and integrated riser and mooring support structures as deputy construction & integration manager. As site manager and deputy construction & integration manager have ensured seamless alignment between engineering, procurement, and construction, mitigated risks, and maintained high levels of stakeholder satisfaction. Notably, I led VLCC conversions, overseeing tank cleaning, gas freeing, dry docking, hull repairs, and conversion, as well as towage operations, while collaborating with engineering teams to optimize marine system selection. I have actively participated in lesson learnt to bring forward good practices and design upgrades to future projects. Office FPSO - Have been part of project management team, marine schedule planning, identifying reducing dependencies, identifying major construction that can executed in a parallel process increasing float, reducing risks. Have  participated in the discussions of optimisation of marine hull spaces, pump room, engine room for top sides and marine deck equipment spaces and other marine engineering opas.   Brownfield project on operating FPSO - Developed a comprehensive project plan and process for hot work, structural repairs, and converting void tanks to ballast tanks in adjacent spaces containing heated products at 55°C, ensuring compliance with national labor heat stress regulations without plant shutdown. Created detailed timelines and budgets, assembled the project team, facilitated team building. Prepared SIMOPS dossier in accordance with TOTAL's requirements to commence major activities and led project execution, effectively managing risks and controlling costs to achieve successful completion within budget as project manager. I am looking forward to assisting during feed, contracts, analysing best suited marine deliverables & optimizing budget as per requirements, help plan the schedule, w.b.s. and identify schedule dependencies to deliver marine completion prior integration. Be at site during schedule phase closures, commissioning & equipment performance tests, attend FATs and preparation of all marine equipment to be operational and ready prior vessel moving to final location. Be offshore during start-up, develop and explain all operational procedures to ensure safe operations and backup offshore as required.

Manager, Superintendent

A petrochemical industry expert with more than six years of experience who has advanced knowledge in designing pipe racks, equipment structures, shelters, miscellaneous stages, and platforms using different international codes and standards. Acts as a global support engineer for structural engineering discussions with client

Engineer

Over 40 years of experience as QA Manager, HSEQ Manager and Fabrication Manager with both operator and EPCI contractor in onshore and offshore oil and gas projects including, LNG plants, processing facilities, pipeline procurement, pipelines fabrication and installation, jacket and deck fabrication and installation and large-scale civil engineering projects. Broad based experience in development, review, approval and implementation of quality management systems, safety management systems, emergency response, site safety management, construction and technical safety management, asset integrity management, facilitation of workshops for lessons learned, risk management and management of change, developing scope of work and management of sub sea fabrication contracts, development of scopes of work and management of consultants for formal safety cases, development of scope of work and management of independent verification body contracts, certification contracts, marine warranty surveyor services contracts, procurement of pipeline materials and equipment, landfall sites management, company site representative, construction quality management, third party inspection contracts, quality control and non-destructive testing.

Manager

Experienced professional with over 15 years of experience in piping design and plant layout. Proven track record in feasibility study, FEED, detailed engineering, fabrication, construction and installation in the oil & gas processing industry. I have successfully worked on a variety of offshore and onshore projects. During my 11 years in offshore projects, I have been involved in the FEED, detailed engineering, EPC and EPCI phase of Wellhead Platforms (WHP), Riser Platforms (RP), Floating Production Units (FPU), and Floating Production Storage and Offloading (FPSO) systems. Additionally, I have 4 years of experience in onshore projects such as LNG plants, oil refineries, and gas processing facilities for the EPCI phase. My expertise extends to international oil & gas industrial codes & standards, piping design, plant layout assessment (i.e. operability, accessibility and maintainability analysis), fabrication, construction, mechanical handling assessments, hook-up philosophy, and transportation & installation (T&I) philosophy. Strong analytical abilities and a commitment to continuous learning in a technical environment. Equipped with a foundational understanding of engineering principles and hands-on experience with leading teams in multiple professional and organizational settings. Problem-solving skills and collaborative attitude make me well-suited for roles that require high-level technical expertise. Knowledge of industry standards and regulations, as well as proficiency in using various engineering software such as AutoCAD, Navisworks, Smart Plan Review, Aveva Review, E3D, SP3D, Excel, Word & PowerPoint and project management. Prepared to drive efficiency and innovation in complex piping systems.

Engineer, Supervisor / Technician, Manager, Superintendent, Drafter / Designer

●       Project Coordination and Supervision: Overseeing and managing various aspects of project execution, including site activities, installation supervision, pre-commissioning and commissioning and ensuring adherence to specifications and safety standards. For example, supervising the installation of new equipment for static and rotating machinery in the Kinarut Compressor Upgrading Project. ●       Engineering Support and Design Verification: Providing technical support for basic, FEED and preliminary designs include design verifications compliance with specifications and standards. In the role of Snr. Mechanical/Rotating Engineer, providing conceptual and practical FEED and conducting design verifications through single-discipline and inter-discipline checks. ●       Vendor and Subcontractor Management: Reviewing and managing submissions from vendors and subcontractors to ensure compliance with project specifications. This includes tasks like reviewing vendor and subcontractor submittals for compliance in the Snr. Mechanical/Piping Engineer role. ●       Technical Procurement and Bid Evaluation: Supporting technical procurement processes and evaluating bids to acquire the right materials and services. Providing technical procurement support and evaluating technical bids for procurement. ●       Site Surveillance and Execution Planning: Conducting site surveillance and detailed work execution planning to ensure efficient and safe project activities. Performing site surveillance for detailed work execution planning in the Kinarut Compressor Upgrading Project. ●       Risk Management and Safety Compliance: Identifying and managing risks and ensuring compliance with safety standards and regulations. Providing Job Hazard Analysis and Risk Assessments for installations in the Snr. Mechanical/Piping Engineer role. ●       Interdisciplinary Collaboration: Working collaboratively with other departments and stakeholders to develop clash-free designs and resolve project issues. Collaborating with other departments to ensure alignment and develop effective designs. ●       Project Documentation and Reporting: Preparing comprehensive project documentation, including work packs, final reports, and claims submissions. Compiling Project Final Document reports and claim submissions in the Mechanical/Piping Engineer role. ●       Technical Problem Solving: Developing technical solutions and recommendations for site-specific issues to address challenges promptly and effectively. Initiating technical solutions and providing recommendations for site issues in the Snr. Mechanical/Piping Engineer role. ●       Maintenance and Facilities Management: Managing the operation and maintenance of critical facility systems and ensuring efficient maintenance activities. Overseeing maintenance of systems such as HVAC and the chillers, Cooling water pumps and motors, Hot water boiler, Liquified oxygen tank (VIE), Liquified Petroleum Gas (LPG) tank system and fire alarm systems in the Facilities Engineer role. Specialized Mechanical Services: Expertise in specialized mechanical services such as chemical cleaning, lube oil flushing, and pipeline pigging. Managing chemical cleaning and lube oil flushing activities in the Mechanical Service Engineer cum Project Engineer role

10 years of experience in a multinational engineering company as an Electrical and Instrumentation designer providing engineering design for both electrical and instrument construction of various power plant type, as well as support at project site which involves design coordination and assist supervision for installation works.

My name is Amirul Hakeem, and I am 24 years old. I hold a diploma in Engineering (Electrical and Electronic) from Politeknik Ungku Omar, graduating with a CGPA of 3.11. Currently, I am pursuing a Bachelor of Technology in Electronic Engineering at Wawasan Open University to further enhance my technical expertise. I am currently employed at Solarvest Energy as a Quality Safety Executive, specializing in Health, Safety, and Environment (HSE) and Quality disciplines. During my tenure, I have successfully developed and implemented quality inspection checklists (Revision 1 and Revision 2) for site applications. These tools have significantly influenced and improved contractor performance during construction phases and service delivery in operations and maintenance. I am also involved in commercial and industrial, large-scale solar farms, and residential projects for quality, HSE, and contractor management. I am passionate about driving quality excellence, ensuring compliance, and fostering safety in renewable energy projects. My commitment to continuous improvement and my academic pursuits demonstrate my dedication to advancing in the field of engineering and sustainability.

Drafter / Designer, Engineer, Inspector, Supervisor / Technician