Safety freelance

* Total experience in the Oil and Gas Industry is more than 24 years, with details of 6 years in the field of oil refinery operations, and 18 years in the field of processing facility design (consisting of 15 years onshore and 3 years offshore) both in Indonesia and abroad (Sultanate of Oman and Brunei Darussalam) * Extensive experience in Concepts, FEED (Front End Engineering Design), DD (Detailed Design) for onshore/offshore processing facilities, refinery operations (Crude Oil Distillation Unit, Naphtha Hydro Treating Unit and Catalytic Reforming Unit) and also start-up & commissioning. * Experience in process studies (flow assurance study, dispersion study, etc.) and proficient in several process simulation software (HYSYS/UniSim, Shell FRED, FLARESIM, PIPESIM and OLGA).

Engineer

HSE Professional with over 12+ years of vast experience in Ofshore,Refinery, Petrochemical, Oil & Gas, Operaton, Maintenance, Pre Commissionin,, Commissionin, , Start-up , Stabilizaton Hi,h Rise Buildin,, Batchin, Plant and Constructon projects in Ni,eria, nndia, /AE, Saudi Arabia, and Qatar. Holds a DnPLOMA nN MECHANnCAL ENGnNEERnNG and DnPLOMA nN FnRE&SAFETY ENGnNEERnNG , NEBOSH-nGC, nOSH-MS,OSHA-30 Hour and other certficatons from nnternatonal Safety Or,anisatons and has consistently exceeded expectatons throu,h my career.

Engineer

Qualified in Health, Safety, and Environment, equipped with Ahli K3 Umum Ministry of Manpower of The Republic of Indonesia certification and NEBOSH International General Certificate with Geological Engineering background. Demonstrated experience in oil and gas industry for more than two years. I have knowledge about the business development and project management from previous jobs. A quick learner, an energetic and passionate professional to offers the highest quality of services for your company.

Inspector, Manager, Supervisor / Technician, Engineer

A process engineer in both engineering consultant and EPC company for almost ten years, mostly in oil and gas projects, delivering various process studies, calculations, and drawings. Aside from good understanding of process design and proficiencies in applicable design standards, she is also experienced in developing manpower planning as well as executing pre-commissioning and commissioning activities.

Engineer, Translator

Adaptable and innovative qualified Mechanical Engineer with over 15 years of experience in the power generation sector. My experience includes working within maintenance, installation, and commissioning power stations, especially gas and steam turbines in the most best-selling brands in different capacities such as; GE, Alstom , Siemens, Mitsubishi and Ansaldo Energia. I have ability to analyze engineering problems, evaluate and recommend alternative solutions and communicate recommendations effectively with strengths include ability to work in multinational environment, good problem solving, hands on team player, able to work at all levels and under pressure, self motivated, energetic with leading management and strong communications skills. I have always been intrigued by and cherished the idea of working in a competitive environment and been seeking an opportunity to express my potentials.

Engineer

Bachelor Of Electrical & Electronic Engineering (Hons.), Certified NEBOSH International General Certificate in Occupational Health and Safety, Certified Lead Auditor for ISO 14001:2015 Environmental Management System, ISO 45001:2018 OHS Management System and ISO 9001 Quality Management System, with an exceptional 18-years career in the dynamic and demanding field of Oil and Gas Industry, Petrochemical Operation & Production, Plant Maintenance, Turnaround/Shutdown and Offshore/Onshore facilities. I started my career as Project Engineer (Electrical & Instrument), Senior Reliability Engineer and due to my interest and passionate in HSE, I turned my career as HSE Delivery Specialist/Field Compliance Engineer, and my last position is a Manager Fire & Hazard Response Management. Now, I’m a HSE Freelance as a HSE Trainer for Oil and Gas Safety Passport (OGSP) under National Institute of Occupational Safety & Health (NIOSH) Malaysia, freelance auditor for ISO 14001(Environmental Management System) and ISO 45001(Occupational Health and Safety) and Authorized Gas Tester and Entry Supervisor for Confined Space activity during Shutdown/Turn Around. I’m HRD Corp Accredited Trainer and a proven HSE Subject Matter Expert (SME) in Operational Safety, Health and Environment, HSE Management System, Assurance Program, Incident Investigation System, HSE Trainers for Safe System of Work (SSOW) covering Permit to Work (PTW), Job Safety Analysis (JSA), Hot Work, Working at Height, Excavation, Hazard Identification, H2S Awareness, Chemical Safety, Slips Trip & Fall Prevention, Lock-Out Tag (LOTO), Emergency Response & Crisis Management, Process Safety Management(PSM) and etc. Qualified Technical Professional in Fire Safety Management and Emergency Response in PETRONAS HSE skill group management.

Manager, Superintendent, Engineer, Inspector

Bachelor in Chemical Engineering, with over 5 years of operational experience in the petrochemical and rubber industries, seeking to leverage technical expertise within a progressive organization that values continuous improvement. As a Production Engineer at Idemitsu SM (Malaysia) Sdn Bhd, successfully managed daily operations of a petrochemical plant, optimizing processes and ensuring compliance with safety and quality standards. Demonstrated strong skills in utilities management, cost analysis, and project management, leading initiatives that enhanced efficiency and reduced operational risks. Proven ability to communicate effectively with vendors and stakeholders, troubleshoot technical issues, and maintain safety compliance, while fostering a collaborative team environment. Proficient in a variety of software and engineering tools, including Aspen HYSYS, SAP, and AutoCAD, ready to contribute to impactful solutions in a fast-paced setting.

Engineer

A first-class Petroleum Engineering Technology graduate, with a strong focus on process optimization, process safety management, plant operation, performance monitoring and safety compliance enhancement. Available to start working immediately and willing to relocate for suitable opportunities.

Engineer

More than 14 years experienced and passionate health and safety professional with strong observation skills and keen attention to detail. Bringing profound skills in risk management and safety to analyse hazards and recommend corrective actions in a timely manner, experience implement of LOTO system for pre-commissioning/commissioning, maintenance and start up process.   Holding NEBOSH IGC, OHSA Oil & Gas Safety Professional 233 Hours, IOSH Managing Safely, General OHS Expert (AK3U), Electrical OHS Expert (AK3 Listrik), Supervisor Oil & Gas Expert (AK3 Migas), Construction OHS Expert (AK3  Konstruksi), Basic Sea Survival (BSS) and Lock Out Tag Out Training.   My personality is energic and responsive with analysis ability, confidence and have strong communication, have good interpersonal skills. A good team player with ability to work as an independent, work well on team that will support the company to achieve Zero Accident in working place.

Engineer

Accomplished HSE professional with over 16 years of expertise in the oil and gas industry, recognized for implementing robust QHSE management systems, spearheading safety initiatives, and enhancing safety cultures. Demonstrates exceptional project management capabilities, leading multi-disciplinary teams across diverse onshore and offshore operational sites. Adept in business analysis, driving budget development, and influencing strategic decisions to streamline HSE programs, achieving a 40% reduction in accident costs. Proven track record in executing high-impact HSE programs and protocols, successfully managing complex projects from inception to completion with zero Loss Time Injury. l  Proven Leadership in QHSE Management: Successfully implemented effective QHSE management systems, resulting in improved safety cultures and compliance with industry standards. l  Environmental Expertise: Managed environmental compliance and safety for large-scale projects, ensuring adherence to regulations and improving safety protocols. Implemented environmental management systems (ISO 14001. l  HSSE Standards and Process Development: Developed and implemented HSSE systems, processes, procedures, and plans to support operations across organizations. Implemented integrated management systems (ISO 9001, ISO 14001, ISO 45001) and ensured alignment with legal requirements and organizational goals. l  Performance Insights and Reporting: Provided insights and analysis through regular reporting of safety metrics and ESG (Sustainability) data, supporting decision-making and continuous improvement initiatives.

Engineer

HSE Professional with +17 yrs experience in the oilfield, both onshore and offshore with high demand projects with main Oil Operators developing positions from Advisor to Operations Superintendent with opportunity to handle several departments on projects and +20 persons under my supervision. Experience goes from high quality performance on the activities always following the most strict safety and quality standards from international, local and company internal regulations achieving remarkable results expressed on monthly KPIs presented to high direction and government. Participate into major gas project certification under ISO:18001 and ISO:45001 at same time, achieving goal with ZERO NON CONFORMANCES, being the first company in the area to obtains such distinction.  As part of mentioned experience could be mentioned Incident Management, Oil Spill Response, Crisis Management, Process Safety follow up and audit, Behave Based on Safety with application of focus into main characteristics of involved personnel in order to create an ownership during their activities as natural behave not commanded by a System. Strong knowledge on the preparedness of liaison opportunities between Company and Contractors on a yearly basis with performing of major meeting (forum) in order to get a closer approach from both sides and create/maintain a direct compromise from highest direction with operations at all levels.  Also have capability to create and perform dedicated training to all personnel (from direction level to auxiliary) in all those required areas, increasing effectiveness at the moment of activities performing. Could be considered a person highly oriented to quality, safe and human performance of the activities, keeping human resource as main value of the company. 

A mechanical engineer with 1.5 years of experience designing, analyzing, and improving mechanical systems and components. Able to manage complex projects and ensure they meet technical specifications and client requirements. Skilled in using a few engineering software and conducting simulations to optimize designs. Committed to continuous learning and staying updated with industry trends and advancements.

Engineer

Process Safety Engineer at NRGtech Services since October 2022. Worked in various roles including technical engineering, business development, project engineering, as well as mentorship of interns and fresh recruits. Process safety experience includes loss prevention, risk analysis, safety studies of brown field and green field projects in several design phases - Concept, FEED, and Detailed etc. experience in carrying out various process safety studies such as HAZOP, HAZID, SIL Classification, SIL Verification, Process Safety Assessment, F&G Detection and Mapping, Hazard Consequence Modeling etc. Knowledge of LOPA, Shell DEPs pertaining to Fire Safety, DNV Recommended Practices for Dropped Object Study, etc.

Engineer, Manager

I am a graduate of a Vocational High School (SMK) majoring in Industrial Electronics Engineering. During my education at Vocational School, I had the opportunity to undergo Field Work Practice at PT. Semen Indonesia (Persero), Tbk. in Gresik in the electrical maintenance section as a technician. This experience gave me a good understanding of the technical work, electrical maintenance, and safety standards required in a work environment. I have a great willingness to learn and am ready to face new challenges that may arise in the work environment

Engineer, Supervisor / Technician

I have over 15 years of managerial experience around operation, maintenance, and project implementation as a manager and managed the big teams. I heve knowledge and skill in electrical systems, generators, and cellular telecommunications. I have a strong work ethic and good judgment in completing every task and responsibility

Manager, Other, Supervisor / Technician, Superintendent

Results-driven Mechanical Engineer with 11 years' working experience in Oil & Gas and Petrochemical Industry. Strong combination of technical, cross-functional and project management skills. Certified Technology Professional (Ts.) under MBOT. Have vast capability skills & experience in Asset Integrity & Reliability Management, Process Safety Management (PSM), Operation & Maintenance and HSSE fields for offshore and onshore facilities.

Engineer

Fort de près de 16 ans d'expérience en ingénierie de projet dans l'industrie pétrolière, j'ai développé une expertise pointue en mécanique des fluides numériques et énergétique. Au cours de ma carrière chez SAIPEM sa, j'ai évolué du poste d’ingénieur à celui de responsable du département Flow Assurance, ce qui m'a permis de piloter des équipes sur des projets offshore multidisciplinaires dans des environnements internationaux et multiculturels exigeants. Mon domaine de spécialité, la Flow Assurance, se situe à la croisée des procédés et des autres disciplines d'ingénierie. J'ai ainsi résolu des problématiques d'écoulement en conduites et optimisé les moyens de production de champs pétroliers, depuis le réservoir jusqu'au traitement en surface. En tant que responsable, j'ai su mettre en place des méthodes de travail collaboratives et efficaces, en assurant une communication fluide avec les différentes disciplines impliquées sur projet (pipeline, installation, interfaces, management de projet). Je suis reconnu pour ma capacité à trouver des compromis optimaux entre les objectifs de conception, les attentes des clients et les contraintes contractuelles, ce qui m'a permis de jouer un rôle clé dans toutes les phases des projets, de la faisabilité à l'EPCI. Aujourd'hui, je réoriente ma carrière vers le secteur des énergies renouvelables et de la transition énergétique, un choix aligné avec mes valeurs et mes convictions personnelles. Grâce à mon expérience des projets complexes et ma capacité d’adaptation, je suis prêt à relever de nouveaux défis dans cette industrie, tout en développant d'autres compétences spécifiques à ce secteur.

Engineer, Manager, Other

Proactive and multi-skilled Instrumentation & Control professional offering over 35 years of cross-functional experience in Design, Engineering, Project management, Functional safety lifecycle management, OT cybersecurity lifecycle management, OT systems networking and integration, Rotating machinery control & monitoring system, Pipeline control and monitoring system, Analyzers and shelters, Steam & water analysis system, Continuous Emission Monitoring System, Tank Gauging and Metering system, Vendor Package systems, Plant maintenance, Plant reliability, Technical coaching & training, SAP, Six sigma, Total Quality Management system, Internal and external auditing, Human resources planning and management.

Engineer, Manager, Inspector

40 years Experiences in oil and gas industry on upstream and downstream related to wells on engineering, fabrication, commissioning and Operation Readiness & Assurance of the platforms, Semi FPS and FPSO facilities on special project related to EPCC.

Manager, Superintendent, Supervisor / Technician

HSE Practitioner with 6+ years of progressive and valuable experience in the Health, Safety, and Environmental. Proven to be an efficient, enthusiatic, high analytical thinking, problem solving, and strong leadership skill. Experienced and knowledgeable in Risk Assessment, Workplace Safety, and Occupational Health and Safety Management System (OHSMS).

Engineer, Inspector, Superintendent, Supervisor / Technician

Mechanical Maintenance Engineer with experience in maintenance planning & RCM of equipment. Field experience in Maintenance Execution and Troubleshooting in Major Static and Rotary equipment's such as Centrifugal & Reciprocating Pumps, Hydraulic pump Storage tanks, Spheres, Boiler, Steam turbine, Economizer, HVAC Superheater, Exchanger and Pipelines. Commissioning and Erection of Pipelines, tanks, Pumps, & loading gantry. Hands-on Experience in SAP MM, SAP PM, and Application packages like Digital Twin, MS Office, (performing RCA), Shell w-IMS. Strong soft and business skills in team collaboration, stakeholder management, Continuous improvement, team leadership and problem-solving skills.

Engineer, Manager

Results-oriented QA/QC & Site Construction Field Supervision Professional with 10 years of combined experience in the oil & gas and wind farm industries. Demonstrated Expertise in leading cross-functional teams to achieve exceptional construction progress while maintaining an optimum quality standard. Skilled in Quality Assurance/Control Activities, structural fabrication, welding, quality auditing, project procedure development and risk management. Bachelor's Degree Holder with a total of 7 years overseas in Malaysia, Singapore, Brunei Darussalam (Kuala Belait) for working and studying purpose.

Manager, Superintendent, Supervisor / Technician

I am a skilled welding NDT inspector with 9 years experience in different industries. Naval, nuclear, pipeline, Steel structure. Strong communication skills, lead, available for worldwide project, daily rate depending on the project. French, english, spanish, italian speaking.

A

Engineer, Manager, Supervisor / Technician, Superintendent, Other, Inspector, Drafter / Designer

To secure position in the field of Mechanical Engineering, where I can apply my engineering skills to develop my career and company benefits.

Engineer