Static Equipments freelance

I have over thirty-five years' experience in a variety of oil and gas industry projects. My project management experience both onshore and offshore, and both brownfield and greenfield. This management experience also covers upstream, midstream, and downstream including work at the chemical and pharmaceutical end of the industry. The extent of my project management experience covers the full aspects of a project lifecycle from front end loading (FEED) and conceptual design studies to commissioning, completion and project hand-over. This experience covers both OPEX and CAPEX projects which reflects my ability to manage wide ranging of budgets and resource levels. I have experience in both preparing and reviewing bid documents, contract negotiations, and awarding and sole management of contracts. During the execution of projects, I have been involved in the revision of man-hour estimations for projects, participating in HAZOP's as well as preparing specifications and writing procedural documents. Also, my experience is indicative my exposure to, and ability to manage all levels of interface requirements between client and contractor companies from a design, procurement, construction, fabrication, and commissioning perspective. As my project duties have been executed in environments as different as desert locations to equatorial jungle and on to ex-Soviet locations and the sub-zero temperatures this implies. I have an extensive, and differing understanding, of the project requirements for implementing all relevant standards and regulations covering engineering, health, safety and environmental issues including emission regulation (CDM), control of major accidents (COMAH), and this includes working in major accident hazard units (MAH), and implementing, executing, and monitoring the Management of Change process. Being widely travelled my exposure to differing lifestyles and cultures is extensive. I have a good balance of cultural appreciation with an experience of managing multi-national teams. This coupled with good communication skills means I communicate effectively with all project personnel.This translates into extensive experience of stakeholder management, from joint venture partners and client management, through contractors, sub-contractors and

* A lot of experience since 2012 in technical fields EPC FED & FEED activity including Construstion Activity and QA/QC Inspection at various industry EPC Construction and Turn Around Maintenance Activity, Pre-Commissioning & Commissioning – Start Up (Oil & Gas, Petrochemical, Fertilizer and Mining). Familiar with Static Equipment, Rotating Equipment, Mechanical Package, Piping, Structure and Preservation. 

Engineer, Inspector, Supervisor / Technician, Superintendent, Manager

I have work experience of more than 15 years in the Oil and Gas Professional Engineer having hands-on experiences in Green Field or Brown Field at Offshore Project, Onshore Project. The combination of Engineering and project execution skills strengthen my contribution of the successful and safe execution of project during FEED, Detail Design Engineering, Construction, Commissioning and Operation phase at Onshore and Offshore Project

Engineer, Manager, Superintendent

To shortly introduce myself, my name is Md. Jual Afsar and Graduated from Sonargaon University, Dhaka. Technology in Mechanical Engineering. Also Post Graduated from Southeast University Dhaka ,MBA-Master of Business Administration (Major MIS) of The Southeast Business School I am working with Suez fence in 500 MLD Ganadharpur water treatment Plant under Dhaka wasa project . Dhaka Bangladesh, Recently I have completed Dhaka Metro RAIL Project under DMTCL with NKDM ASSESSOCATION under employee DDCL Dhaka Bangladesh    I AM WRITING TO EXPRESS MY INTEREST IN THE POST OF APPLICATION APPLY FOR QA/QC MECHANICAL INSPECTOR . I AM CONFIDENT THAT MY TECHNICAL KNOWLEDGE AND RELATED EXPERIENCE CAN CONTRIBUTE TO YOUR TEAM.     I would welcome the opportunity to discuss how my expertise could contribute to your company , you can find my CV and references. If you have any questions, you can reach me by phone: +8801823465561 and e-mail: Juwel.me95@gmail.com [Juwel.me95@gmail.com].   Thank you for taking the time to read my application and for your consideration! -- -- Best Regards,   Md.Jual Afsar QA/QC Mechanical inspector  B.sc in Mechanical Engineer, MBA Management , NDT Level II (UT,RT,MT,PT,VT)    

Inspector, Manager, Superintendent

Having more than two-year experience (2022-2024) in Mechanical Engineering involves at various FEED (Front End Engineering Design) projects such as oil downstream and petrochemical project. Conduct or assist investigation and/or resolution of initiated question pertaining to mechanical and piping engineering in general. Deal with mechanical static but not limited to specification, mechanical data sheet, equipment list, technical bid analysis, requisition for quotation, finite element analysis, engineering drawing, mechanical calculation, and bill of material.

Engineer

Experienced Construction Mechanical Engineer with over 9 years of expertise in installing and maintaining both static and rotating mechanical equipment for large-scale construction projects, including major shutdowns and modifications. Proficient in project scheduling using Microsoft Project, budget management, and resource allocation. Skilled at leading teams and ensuring compliance with industry standards, safety regulations, and quality control measures. Demonstrated ability to collaborate with contractors, manage cross-functional teams, and deliver mechanical systems on time and within budget. Detail-oriented with a focus on cost reduction, efficiency improvements, and achieving project milestones without the need for rework.

Engineer, Supervisor / Technician

Over 16 years extensive experience in driving wide spectrum project management and fabrication engineering functions towards ensuring on time and on budget oil & gas project completions in line with set scopes. Well versed in the areas of project planning and scheduling, safety and quality compliance, risk identification and mitigation, procurement and cost control coupled with average technical knowhow and understanding of the ASME, PTS as well as CSP standards. 

Engineer

To contribute to the area of Quality Assurance/Control and Integrity in Projects and Operations with the aim of identifying, evaluating, recommending, and implementing improvements which will add value to the organisation. With technical grasp acquired, to further grow in project and people management skills. 

Engineer

Senior Technical Professional with Halliburton Pipeline & Process Services. I have a combined experience of more than 13 years in oil and gas services, subsea umbilical, and pipeline/process Precommissioning and commissioning. Technical support, Engineering and execution for oil and gas services: Umbilical, Precommissioning pipelines FCG, Chemical cleaning, HLD, Flange management torque and tensioner, Flange tester, Hydro test, Displacement for umbilicals and pipelines, Commissioning leak test Experience in testing subsea systems including UTA, SDU, PLR, CRU, HFL, OFL, EFL, TUTU, PIH, and all components of the SPS system. Moreover, I have more than seven years' experience in technical sales positions, which include proposals, terms, and conditions review, as well as the preparation of cost estimates for region and local tenders.   Over the course of my career, I have worked with various clients including BP, ENI, Shell, Equinor, BG, SAIPEM, Subsea7, Saudi Aramco, etc. I have a recent medical check, and I have received training in H2S from Maersk.   In 2017, as part of the engineering stage of a 1500 m deep water project, I was assigned to the Halliburton global team in Aberdeen to prepare Umbilical Precommissioning procedures (fiber testing, electrical testing, and tubing flushing) as well as pipeline Precommissioning procedures.   For more information kindly follow the link of my LinkedIn profile: http://linkedin.com/in/mohamed-abd-el-naser-33353033http://linkedin.com/in/mohamed-abd-el-naser-33353033 [http://linkedin.com/in/mohamed-abd-el-naser-33353033] Currently working in Saudi Arabia as a commuter 35in/35off

Engineer

A dynamic and diligent professional with over 17 years of diverse Topside of Fixed Platform, FPSO, Feed Front end & Pipelines, Onshore/Offshore Oil and Gas related Mechanical and/or Piping design experience, proficient in managing air-cooling condensate unit separators, water bath heaters, and various components of the oil, gas, and water industries. Expertise also extends to petrochemical and other process-based industries.

Drafter / Designer

Clarence Loganathan is a Chartered Engineer(Engineering Council UK) and Chartered Marine Engineer(Institute of Marine Engineering Science & Technology London). He has more than 19 years of diverse experience in Engineering (including subsea), Asset Integrity , Operations , Inspection and Maintenance. Has solid experience in UK, Norway, Holland, Libya, Southern Ireland , Malaysia and currently Austria Key experience : - Asset Life Extension - Asset Integrity Management -Temporary and permanent repairs - Operation ,Commissioning Support, Intervention , IRM and ILI - FEED and Detailed Design - Subsea System Readiness Level - Verification of Riser ESDV - Asset integrity Assurance(SCE, Performance Standard, ITPM) - Petronas Guidelines for Full Field or Brownfield Operational Readiness (Petronas PPGUA, OSRMS and ORA) - Familiar with Petronas Technical Standards and Shell DEPS -Stakeholders engagement Excellent communicator, skilled in project engineering management and leadership. Experience in Tender process for reviewing technical capabilities of Subsea , Pipeline, Static equipment and piping survey, inspection and intervention contractors Operator experience in subsea integrity preparation of cost for annual subsea system and pipeline IRM including cost evaluation of the IRM and Intervention Vessel. Operator experience in managing third party contractors for inspection and intervention.

Engineer, Manager, Other

More than 20 years in the field Mechanical oil fied.

An Assistant Manger with the role of Lead Mechanical Engineer; more than 6 years of experience in projects & maintenance related to pump, piping, heat exchangers, chillers, air compressors, gas engine (COGEN CHP), conveyor system and numerous multi-discipline engineering works. Also involved in leadership roles for improvement projects, managing manpower, upkeep budget, etc.

Engineer, Manager

independent

Inspector

Hardworking, target goal, work as a team and individually,