Process freelance

Senior Technical Professional with Halliburton Pipeline & Process Services. I have a combined experience of more than 13 years in oil and gas services, subsea umbilical, and pipeline/process Precommissioning and commissioning. Technical support, Engineering and execution for oil and gas services: Umbilical, Precommissioning pipelines FCG, Chemical cleaning, HLD, Flange management torque and tensioner, Flange tester, Hydro test, Displacement for umbilicals and pipelines, Commissioning leak test Experience in testing subsea systems including UTA, SDU, PLR, CRU, HFL, OFL, EFL, TUTU, PIH, and all components of the SPS system. Moreover, I have more than seven years' experience in technical sales positions, which include proposals, terms, and conditions review, as well as the preparation of cost estimates for region and local tenders.   Over the course of my career, I have worked with various clients including BP, ENI, Shell, Equinor, BG, SAIPEM, Subsea7, Saudi Aramco, etc. I have a recent medical check, and I have received training in H2S from Maersk.   In 2017, as part of the engineering stage of a 1500 m deep water project, I was assigned to the Halliburton global team in Aberdeen to prepare Umbilical Precommissioning procedures (fiber testing, electrical testing, and tubing flushing) as well as pipeline Precommissioning procedures.   For more information kindly follow the link of my LinkedIn profile: http://linkedin.com/in/mohamed-abd-el-naser-33353033http://linkedin.com/in/mohamed-abd-el-naser-33353033 [http://linkedin.com/in/mohamed-abd-el-naser-33353033] Currently working in Saudi Arabia as a commuter 35in/35off

Engineer

A dynamic and diligent professional with over 17 years of diverse Topside of Fixed Platform, FPSO, Feed Front end & Pipelines, Onshore/Offshore Oil and Gas related Mechanical and/or Piping design experience, proficient in managing air-cooling condensate unit separators, water bath heaters, and various components of the oil, gas, and water industries. Expertise also extends to petrochemical and other process-based industries.

Drafter / Designer

1. Humble and Kind 2. Intelligent 3. Approachable

Engineer, Superintendent

I AM A PROCESS ENGINEER WITH TWO (22) YEARS EXPERIENCES IN ENGINEERING (CONCEPTUAL PHASE, FEED PHASE AND DED PHASE) AND CONSTRUCTION AREA OF OIL AND GAS PRODUCTION FACILITIES, NATURAL GAS PROCESSING, CRUDE OIL PROCESSING, AND LNG PLANT.

Engineer

I am a fresh graduate student, I completed my internship at Petronas Carigali Sdn Bhd under Electrical department and completed my GEES at Malaysia LNG Petronas under Instrument department.

Engineer, Inspector, Drafter / Designer, Other, Superintendent

Certified Lean Six Sigma Green Belt, manage projects using data driven methodology, lean methodology, DMAIC format to improve quality, yield, performance and overall output of manufacturing, equipment and process. Data analysis using JMP tools, to evaluate data collection, trend analysis, commonality study and root cause analysis. Experienced in project management, root cause analysis using Lean tools, improvement plan generation, design and development for best practice. Develop and maintain process failure mode and effect analysis, control plan, process specifications, work instructions and out of control plan for lean and efficient equipment and process management. Evaluating Front end engineering design (FEED), design drawings, design specifications, single line diagram (SLD), process flow diagram (PFD) and process and instrument design (P&ID) and generate the bill of material, procedures for safety and cost management. Creation of engineering designs, simulations and analysis for the manufacture and machining of engineering products and application of technical and commercial expertise to the task given to satisfy legislation, costing and customer and employer requirements. Plan, administer, and carry out preventive and corrective maintenance for generators, boilers, and cooling towers, diagnose rotor machines and apply Hazard Identification, Risk Assessment, and Risk Control (HIRARC) to job scope to avoid the hazard, danger, fatality, and property economic loss. Organizing personal and team (if present) and meeting schedule and deadlines and creating budget- consciousness and profit-consciousness for any given project, mission, and assignment. Communicate clearly, deliver presentations or report with confidence and prepare a precise and accurate report for any given task or assignment. Computer literacy: Catia V5, ANSYS, Solidworks, Microsoft office softwares, JMP. Knowledge of: PFMEA, Control Plan, OSHA, FEM, ASME, ISO 9000, ISO 14000, conjugate heat transfer analysis, rotor diagnostic, Bently Navada vibration diagnostic, technical engineering drawing, solid and fluid stress analysis, project management and industrial management.

Engineer

Supporting the operation and maintenance Environmental Management System (EMS) ISO 14001 for Ajman Biorefinery and Waste Water Treatment Facility. [//:0] Collecting environmental data, preparing reports and establishing environmental database. Effluent Quality Monitoring,BOD,COD,Microbiological parameters, sludge cake testing and monitoring before final disposal,Nutient Level (Nitrates and Phosphates). [//:0] Reporting Tools and Technologies; SCADA Systems: Real-time monitoring and reporting of key performance indicators, Lab Information Management Systems (LIMS): Managing and automating sample testing and data reporting. [//:0] Supporting the operation and maintaining ISO14001 environmental management system to optimize environmental performances in accordance with Environmental Policy and Environmental Objectives. [//:0] Air Quality Monitoring, emissions from CHP, flare, especially from incinerators or biogas recovery systems; thermophillic anerobic digesters. [//:0] Assisting in conducting environmental campaigns and trainings by engaging all stakeholders to promote environmental awareness, knowledge and culture. [//:0] Assisting in the tracking any change of control to any environmental standards and procedures and ensure clear and concise communication of these changes to all stakeholders. [//:0] Energy Use and Efficiency,Reporting energy consumption during treatment processes, Highlighting energy-saving initiatives or renewable energy usage (e.g., biogas utilization). [//:0] Sludge Management:Tracking the generation, treatment, and disposal of sludge. [//:0] Chemical Use: Cl2, NaOH, Ca(OCL)2, FeCL3, NH3, H3PO4. [//:0] Monitoring and tracking document, trainings, testing and records related to environmental emergency response plan (EERP) in coordination with relevant stakeholders to ensure compliance. [//:0] Coordinated and monitored environmental testing and sampling activities in compliance with environmental regulations.   PROCESS & OPERATIONS:   [//:0] Sewage flow management: preliminary, primary, secondary, tertiary and disinfection system. [//:0] Monitoring Up flow Anaerobic Sludge Blanket Reactor (UASBR) system, Bio gas Production and upstream process. Aeration tanks, activated sludge management. [//:0] Collecting samples of Activated Sludge, checking SV30 (RAS/WAS/SAS), desludging, sludge cake, collecting centrate, final effluent, checking Conductivity, PH, Total/Residual Chlorine, turbidity, COD/BOD, Total       [//:0] Nitrogen to ensure treated water meets in line with or exceeds EPA standards. [//:0] Calculation of; Pollution Load, Mass Balancing, FM ratio, Efficiency Calculation, up flow velocity in UASBR, SVI, Clarfiers' Blanket testing, Operating Plant Machinery based on MLSS results of lab report. [//:0] Maintaining Chlorination in liquid form at final effluent discharge,total chlorine, turbidity minimum (NTU), conductivity, pH etc. [//:0] SCADA Operation Systems. [//:0] Operational Data in Biogas Plant: Daily gas production, composition (methane percentage), and energy utilization.Process stability indicators (e.g., pH, temperature, volatile fatty acids to alkalinity ratio). [//:0] Sewage Treatment: Influent and effluent water quality parameters (BOD, COD, nutrients). Flow rates and hydraulic retention times (HRT).  [//:0] H₂S Monitoring and Analysis: Conduct routine analysis of biogas for H₂S content, Use gas monitoring equipment (GASTEC Tube measurement capacity approx: 20000 ppm) to ensure compliance with safety and quality standards. [//:0] BIOGAS PLANT BIOREACTOR PROCESS: H2S UPGRADING REPORTING :H2S REMOVAL TECHNIQUES INBIOREACTORS, BIOLOGICAL DESULFURIZATION ,CONTINUOUS H2S MONITORING USING GAS ANALYZERS, REGULAR SAMPLING FOR MICROBIAL HEALTH (IF USING BIOLOGICAL METHODS), MONITOR PH AND REDOX POTENTIAL IN THE BIOREACTOR.

Engineer

Experienced process engineer in oil & gas industry mainly in floater design, upstream offshore design & project management.

Manager

Graduate in Chemical Engineering from Mumbai University, India with more than 20 years of experience in detail engineering & FEED for Power, oil and gas, chemical, petrochemical industries in India and overseas. In depth knowledge of Plant designing, Project processes and standards. Great ability to perform multi-task and meet deadlines

Manager

Results-driven chemical/process engineer with 3 years of experience in project and process background. Proven track record of optimizing chemical processes, improving efficiency, and reducing costs. Skilled in process simulation, design, and troubleshooting. Proficient in utilizing industry-standard software tools such as Aspen HYSYS and AutoCAD. Strong analytical thinker with excellent problem-solving abilities. Effective communicator and team player with a passion for continuous improvement. Seeking opportunities to leverage expertise in chemical engineering to drive innovation and contribute to the success of organization

Engineer

[//:0] ULLERI ANTONELLO Via DeiGiacinti, 11                                                                                                                                           +39-347-3287603 [//:0] 09012Capoterra(CA)– Italy                                                                                                                             antonello.ulleri@yahoo.it [antonello.ulleri@yahoo.it]   ENGINEERING & PRODUCTION MANAGEMENT PRODUCTION SUPERVISOR| GAS & Oil PROCESS SUPERINTENDENT| OPERATIONS MANAGEMENT|Process Engineer   A top-performing and highly skilled Production and Plant Management Professional with extensive experience in the Operation, Commissioning & Start-up, Turnaround, Management, Design, Safety, Training, Planning across international sectors. Strategic expert with demonstrated knowledge of mechanical/chemical principles, engineering products design,manufacturing processes, material selection, and plant operations. Expertise in Refinery Operations, Commissioning & Start-up, and Production Process Operations has developed an excellent working knowledge through all aspects of Oil & Gas Production. Resourceful ability to think analytically and swiftly,“outside the box”; continuously coaching subordinates, and building productive teams. Possess consistent and precise project planning and execution, with a goal oriented approach that ensures efficiency, success and perfection in a sustainable way, from Health, Safety & Environmental point of view.      AREAS OF EXPERTISE Production & Operations Management   Advanced Project Management    Engineering Planning Health & Safety Compliance                      Contractor Management    Risk Assessment   PTW Coordination   Regulatory Standards    Quality & Cost Control   Construction, Commissioning & Start-up   Strategic Planning/Analysis Team Leadership    Relationship Building   Time Management   Creativity & Innovations   ProblemResolution WordProcessing, SpreadsheetExcel, DatabaseAccess, Graphics, Maximo, SAP, OtherSWTools

My name is Ulung Putra Sakti with 24 years of experiences as Professional HSSE in Middle Management at Oil and Gas Company Offshore and Onshore in Upstream to Downstream Bussiness in Indonesia and Overseas Operation (Algeria, Iraq, Malaysia) in the field of Offshore and Land Seismic Data Acquisition, Offshore Platform Production Process Facility, Process Safety Management, Exploration and Development Drilling and Work Over Work Services, EPCI Project Management of Platforms, Subsea Pipeline, Onshore Processing Facilities. Refinery & Petrochemical Business, Fuels Distribution Management Business. My Current Designation as Sr. Analyst Process Safety Assurance at Pertamina International Exploration & Production with working area at Algeria, Iraq, Malaysia.  Thank you for your time and consideration. notes: Certificates:  Nebosh Technical Safety Oil and Gas, Nebosh IGC, IOS Managing Safely, Modern Safety Management System, Process Safety Management, Hazob, Hazid, Bowtie, SECE, Risk Management, QRA, Leadership Management, Advance Taproot Incident Investigation, ISO 45001, ISO 18001, ISO 14001, HSE Management System Auditor, CSMS, Project Safety Management Review, Major Emergency Management, PTW System

Superintendent, Engineer, Manager

I am a Senior Process Engineer working at Sirte Oil Company in Brega, Libya until now

Engineer

Experienced oil and gas professional with a focus on optimizing subsea production, artificial lift, well completions, upstream facilities, and production technologies. Strong knowledge of engineering codes and standards, including API, ASME, NFPA, Total GS, and Mobil Shell DEP Specifications. Over half-decade of hands-on experience in the oil and gas industry, including both onshore and offshore activities. Proficient in process and flow assurance design software, with advanced training in steady-state and transient analysis, process simulation, and preparation of process datasheets, instrumentation, line sizing, equipment sizing, and utility balance calculations. Experienced in front-end engineering design and detailed engineering, with the ability to work effectively in multi-disciplinary teams across various projects.

Engineer

I am currently employed at Sapura Energy Berhad as a Senior Logistics Coordinator, with over 10 years of experience in the oil and gas sector. My expertise spans transportation and installation (T&I) logistics, involving both offshore and onshore projects. I have successfully executed projects across Malaysia, Singapore, Brunei, and Brazil, ranging from straightforward methodologies to complex, multi-stage operations. Previously, I served as an Operations Executive at Omni Offshore Sdn Bhd, managing operations and logistics for two Floating Storage and Offloading (FSO) units. Prior to that, I gained foundational experience during an internship at ExxonMobil Malaysia, where I contributed to both the Marine Department and Procurement Department.

My name is Mohamad Fakhrul Radzi Bin Mustapa. I am a degree holder from University Kuala Lumpur Malaysian Spanish Institute in Bachelor Engineering(Hons)in Mechanical Automotive. Currently I'm employed as a survey engineer. I am seeking a job that is related to any related Engineering or any field. I would really appreciate it if you can reach me through email or the contact number stated in my resume. Please do not disappoint me. I am really hoping for good news soon.