Package freelance

Having 14 years of experience in For Refinery(RCC Pertamina RU VI), Power Plant(Coal Fired Suge Belitung, Mobile Power Plant Banda Aceh), Petrochemical(Sriwijaya Fertilizer, Banggai Amonia Plant), Geothermal (Lahendong Geothermal), FPSO(Feed Inpex Masela FPSO,Inpex Ichthys FPSO, FPSO Petronas 1), Well Head Platform(Tutung Platfotm, OO-OX Platform), LNG Plant(Donggi Senoro LNG,FEED Malaysia LNG Train 9) projects in FEED, detailed engineering design and construction support, as Senior, and Engineer in Mechanical Static and Piping Pipeline Engineering design (Offshore and Onshore Project) Pre-Service, and In-Service (Greenfield and Brownfield), with a variety of projects in Oil and Gas Industry. Experience working with National and Multinational Company for Oil and Gas Company (Client-side), EPCI company (Contractor) and Engineering Consultant Company. Mechanical Piping engineering expertise/experience includes the following: •        Piping Stress Analysis and Piping Material of fixed offshore platform, and Floating Offshore ,Refinery, Power Plant,Pertochemical and Geothermal, LNG Plant for feasibility study, conceptual, basic engineering, FEED, detailed design, and EPC/EPCM projects. •        Mechanical Engineer For Static Equipment(Pressure Vessel, Pig receiver, Reactor, Flare Stack, Regenerator, Orifice Chamber,etc), Rotating Equipment (Pump, Compressor, Turbine), Package Equipment(CO2 Snuffing Package, N2 Package, Crude Oil Crude Oil Stabilization Package, Dilution Water Package, Produced Water Treatment Package, Chemical Injection Package) •        Experience in detail engineering and EPC project for mechanical and piping analyses of offshore structure (jackets and topsides) for Green Field and Brown Field Project during in-service and pre-service conditions such as in-place analysis, seismic analysis, fatigue analysis, lifting analysis, load-out analysis, and transportation/tow analysis. Detail design through local checks that covered connections, supports member strengthening, plate design, etc. Review of Design Drawings and Shop Drawing and coordinate interdisciplinary engineer tasks in the detail engineering stage. •        Reviewed, provided necessary recommendations, and approved EPC Contractor both offshore and onshore Greenfield and Brownfield Mechanical Piping engineering-related deliverables (Calculation, Drawings, and 3D Model). Providing and consolidating Company comments for the associated discipline in respect to the detailed design of onshore and offshore for Pre-service & in-service analysis, Pipe supports, Equipment supports, foundations, etc., during the EPC phase to ensure the Offshore Platform scope of supply is engineered, designed, and integrated to the overall project design and is consistent with project requirements. •        Prepared Material Take-Off (MTO) and Preparation of RFQ (Request for Quotation) and Technical Bid Evaluation (TBE), Commercial bid evaluation, clarification, reviewing vendor documents, and selecting qualified subcontractor at Procurement stage for Piping material. •        Attended Regular Internal, External, and Kick of Meeting (KOM), HAZID and HAZOP meetings, construction review meetings, coordination, and technical meetings with the internal project team, vendor, and subcontractor. •        Has strongly knowledge in the engineering/design, especially the piping material selection, piping components, pipe support, stress analysis, corrosion/erosion, painting, welding, QA/QC, construction, PDMS and piping codes & standards •        Familiar with piping design code and standard and related software e.g. Caesar •        Extensive experience in detailed equipment layout design, 3D model review incorporating piping design, operation and maintenance requirement. •        Experienced in engineering, fabrication, pre-commissioning and commissioning of piping component. •        Experienced in high H2S and high CO2 gas contents including the design of CRA material i.e. Inconel,Alloy •        Experienced in high temperature / high pressure (HPHT) facilities •        Having knowledge Carbon Capture Storage Utilities (CCSU) technology. Main Equipment of Carbon Capture Storage Utilities (CCSU) technology are Compressor,CO2 absorber, Coolers, Pulsation dampers and Diaphragm pump

Engineer

Experienced Rotating Equipment and Package Engineer with a diverse background in petrochemical and oil and gas projects, both onshore and offshore. Proficient in the fundamentals of equipment design and management of rotating equipment and packages including: Pumps (API, ANSI and ISO), Gas Compressors Package (centrifugal and reciprocating), Air Compressor Package, Diesel Engine Generators, Chemical Injection Package, Pedestal Crane, Nitrogen Bottle Rack Package, Material Handling Equipment. Skilled in various project stages such as studies, brownfield upgrades, FEED, detailed design engineering, and vendor/construction and commissioning support. Well-versed in industry codes and standards including API, ASME, ISO, and ASTM. Experienced in developing essential engineering documents including equipment data sheets, technical specifications, material requisitions (MRS), technical bid clarifications, technical bid evaluations (TBES), purchase requisitions, and vendor document reviews.

Engineer

I am a Mechanical Engineer with a strong background in project management within the offshore wind and oil & gas sectors. With an MSc in Sustainability & Environmental Sciences, I bring a unique perspective to engineering challenges, ensuring projects are both efficient and environmentally responsible. My experience spans tender preparation, client acquisition, and strategic sales, with a proven track record in securing high-value projects. I am skilled in leading teams, conducting market research, and delivering compelling sales presentations, currently applying my expertise to roles that align with my passion for sustainability and innovative business development strategies.

Engineer

I am an experienced engineer with up to 15 working years in Project, Technical and Construction disciplines. I have been involved in large-scale Energy Projects (Oil & Gas and Power Generation) with the Project Team. Experience with Multinational Corporations (MNCs) has developed my technical knowledge, management skills and intra-personal attributes. Throughout my professional role as Lead Engineer at GE, my mission is to steer complex EPC projects to success. The leadership role in the APAC region has honed my skills in ensuring the fulfillment of project expectations. I am looking forward to seeking senior positions related to Project Management and Technical to deliver positive results with performance-oriented organizations.

Engineer, Manager

I would like to present my ability in Offshore Process & Piping and Pipeline Design. Have a lot of experience in brownfield engineering and wellhead platform design. First step you should give a chance to brownfield modification project, and wellhead platform projects. I have good ability to review the process/piping design document

I am looking for a role that would bring together my extensive experience in quality, health, safety and environment compliance with my dedicated and proven management skills to achieve remarkable outcomes for my employer. My ability to work closely with a range of stakeholders, bringing together their collective knowledge, I am able to manage the successful implementation of integrated management programs of organizations I have been with.

Overall 16 years of working experiences with EPCIC/EPCC project for offshore platform (Modular, WHP and CPP platform), HUC brownfield, onshore refinery/petrochemical (construction & brownfield) and FLNG project for reputable local and international client such as Sarawak Shell, ONGC, KPOC, LUNDIN, Shell Australia and PETRONAS.

17+ years of experience in mechanical engineering, specializing in engineering and maintenance activities of Turbo-machinery - Gas Turbine for power generation and driving mechanical device (gas compressor and pumps), and also for centrifugal gas compressor for gas injection and export - for upstream oil and gas.

iPMT/PMC Lead Static Equipment Engineer, holding IEng status registered with Engineers Council in the UK, a member of Institution of Mechanical Engineer (IMechE), a Professional member of Energy Institute (MEI), a member of Association for Material Protection and Performance (AMPP), with rich experience gaining from working overseas in multinational environment for reputed Consultancy firms and EPC Contractors on various projects at different phases from FEED to EPC followed at field engineering, covered both onshore and offshore, nearshore, greenfield and brownfield (revamping and conversion projects) across Refinery (intensive, various units), Petrochemical (PP, PE, Naptha cracking, Olefin), Gas Processing Plants GPP, Chemical plant, LNG, FPSO and Wellhead Platform. I have an impressive command of international codes and standards such as API, ASME, ASTM, NACE, TEMA, well versed in static equipment design, have basic knowledge of fired heater. rotating and package equipment, damage mechanisms and corrosion, able to perform thermal design, optimization and selection type of shell & tube heat exchanger using Aspen EDR. The equipment I have been working with ranging from low to high pressure and temperature, thin to thick wall, small to large size, constructed of carbon steel, carbon steel and cladding, carbon steel and refractory lining, low and high alloy, stainless steel and duplex and sour service. I am involved in 4 major projects (2.5~ 5.5 billions dollars) within 5 years in 3 countries since 2019 as a Lead Engineer.

Competent Mechanical proficient in overseeing contractors installing mechanical equipment and keeping all work in strict compliance with applicable codes and standards. Work closely with other engineers, project managers, and stakeholders, also cross-functional teams, including civil, electrical, and structural engineers to ensure seamless integration of mechanical systems into the overall project. Communicate effectively with clients, contractors, and stakeholders to ensure project alignment. Organized and dependable successful at managing multiple priorities. Experienced Mechanical Engineering, Construction and Commissioning with over 14 years of experience in Oil and Gas industry.

Engineer, Superintendent

Dedicated, high-management standart, talented and result oriented professional to apply hands-on experience in process engineering & field expeirence (pre-commissioning & commissioning engineer). Learning on the Fly, Problem Solving, Intellectual Horsepower, Written Communications, Drive For Results, Decision Quality, Informing, Listening, and Dealing with Ambiguity. Intermediate knowledge of engineering design principles and applicable design guides and standards related to assigned engineering discipline.

Drafter / Designer, Engineer

Highly analytical and accomplished leader with combined experience in leading complex operations related to plant, project site, engineering, sales, and business growth from infancy to successful conclusion via implementation of viable strategic plans across chemical and heat transfer plants, biomass power plants with ORC, CHP, and oil/gas industries. Dynamic and resourceful professional, known for driving and assuring delivery excellence in commissioning and start-up activity with EPC packages. Proficient at ensuring alignment of plant and equipment as per standard guidelines. Excellent at efficiently managing people at all levels by providing individualised training. Strong business acumen in exploring and securing profitable business opportunities to ensure realisations of revenue and growth. Possess in-depth knowledge of boilers process designs, thermal oil heaters, process heat equipment, Petrochemicals, FATs, claim management, commissioning, pressure vessel inspection, installation, and plant start-up. Notable history of success spearheading wide range of multifaceted projects from inception to handover within defined time, budget, and quality constraints. Skilled in identifying core risks and streamlining processes to enhance operational excellence and KPIs. Adept at strictly following set policies, procedures, and practices for reducing downtime of activities. Articulate and refined communicator; developing robust relationships with stakeholders and all levels of management.

Manager, Engineer, Other

11 Years' Experience in the Offshore/Marine Industry specializing in Offshore Accommodation Bidding, Design, Interfacing, Construction, and Commissioning. Well-versed in Regulatory Requirements such as IACS (ABS, DNV, BV, LR, etc.), NORSOK, ILO MLC 2006, SOLAS, MARPOL, Brazilian Regulations (NORMAM, NRS, ANVISA, IBAMA etc.), Australian Standards, Petronas Technical Standards (PTS) etc.

Engineer, Manager

A Project Management Professional with 9 years experience handling both onshore and offshore projects throughout the project life cycle from Front End Loading until Commissioning and Handover.

Engineer, Manager

Dedicated and highly motivated Mechanical Engineerwith 5 years experience in oil and gas industry aspiring to work for a company where expertise and skills in Mechanical Rotating Equipment can be used to achieve company's goals and targets

Engineer

Construction Manager, with multidisciplinary management background, excellent communication, organisation and co-ordination skills. Focused on ensuring timely, safe, cost-effective design and implementation during the life cycle of projects from conception to delivery.

●Engineered/Constructed/Commissioned 250+projects worldwide: 150+ small $1-$10 million; 75 medium $10-$99 million; 16 large $100-$900 million; & 10 mega-projects of $1 to $24 billion. ●Successfully Managed – Up to 30 concurrent projects. ●Licensed Professional Engineer: California & Alaska, can be licensed anywhere worldwide by comity. ●Education: BSME from University of California, Berkeley (always in the top 5, worldwide). ●Upstream Oil & Gas: 36 Oil & Gas Production / Separation / Reinjection / Shipping Facilities; Sealift modules to 2,600T/2320mT; 100s of Drillsites / Truckable Modules to 40T/36mT; 4000mi/6400km of Gathering / Injection Lines up to 60”/1500mm x 740psig/50barg and 24”/600mm x 3,280psig/221barg. ●Midstream Oil & Gas: 18,260mi / 29,216km of Transport Pipelines. Diameters to 60” / 1.5m & pressures to 5230psig / 361barg. Largest: 48” / 1.2m x 1180psig / 80barg x 800mi / 1280km and 40” / 1m x 1480psig / 100barg x 2400mi / 4000km (onshore, offshore, oil, gas, products, CO2, batching, spiking, conversions, reversals)., 75 Pump Stations; 45 Compressor Stations; 100+ Meter Stations; 3 underground gas storage plants; 11 major Terminals (marine, pipeline, railroad, truck, piers, loading arms, AFFF, recycle pipelines, fixed & floating roof tanks to 500,000bbl / 60,000cm, gas storage bullets and spheres). ●Downstream Oil & Gas: 6 Refineries (including 2 majors $3.5B & $1.5B; 30 concurrent turnaround projects), 1 Gas Plant; 20 retail gasoline / diesel / lubricant / LPG stations; 4 distribution centers. ●BU Power Plants Combined-Cycle CoGeneration: 40 to 50 MWe backup power plants as part of larger projects. ●BU Power Plants Diesel: 150+ 0.25 to 4.5 MWe backup power / remote main power plants as part of larger projects. ●Power Plants Solar: 300+ 0.25 to 2.5 MWe off-grid valve & meter station power as part of larger projects.

Manager

A professional mechanical engineer with 11 years of experience in mechanical engineering, petroleum production engineering and managing project locally and internationally. My expertise spans mechanical engineering design for offshore projects, including FEED, EPC, EPCC, and EPCIC phases, and includes hands-on maintenance work with static and rotating equipment in gas processing and petrochemical plants. My commitment to enhancing career development, improving team performance, and driving project success has consistently resulted in impactful contributions to the oil and gas industry.

Engineer

* I have almost 14 years of diverse experience in FEED/detail engineering as well as maintenance sector. This gives me unique edge of understanding the aspects from maintenance side as well as design side which can benefit client in achiving overall reliability.

Engineer

 Successfully manage detailed engineering and manufacturing phase, carry out inspection checks and witness mechanical running test of rotating machineries through a robust review of quality control documents.  Installation, commissioning, condition monitoring and maintenance of rotating machineries for reliability and availability of the process plant.  Successfully support vendors to actualize the production promise of the plant.

Graduate mechanical engineer with hands-on experience in the industry, I am passionate about applying engineering principles to solve real-world challenges. During my internship at Ranhill Worley Sdn. Bhd., I gained practical insights including creating detailed mechanical designs, performing precise calculations, and ensuring that systems meet industry standards and project requirements. I am proficient in designing software and Excel, collaborating with engineers and stakeholders to deliver successful projects. My key responsibilities have included drafting designs, reviewing technical documents, and supporting the execution of mechanical engineering projects.

Engineer, Supervisor / Technician

I am Senior Marine Engineer who experienced in floaters engineering such as FPSO, FSO, MOPU, FSU, and TLP. My experienced concentrated on the Marine Systems discipline in FEED, Detail Engineering, Construction, Procurement and Operations and Maintenance. Able to prepare calculations, datasheet, specification, report and all related with engineering requirement.

Engineer

Mechanical Lead Engineer with extensive experience in the design of pressure vessels, towers, and storage tanks. Skilled in procurement documents preparation, vendor document checking, and package technical responsibility. Proficient in training junior mechanical engineers.

Engineer, Manager, Drafter / Designer

Creative professional with extensive project experience from concept to commissioning in water system and water treatment plants. Action-oriented with strong ability to communicate effectively with technology, executive, and business audiences.

Engineer, Superintendent, Manager

I have worked in the oil and gas sector for more than ten years,

Engineer, Other