Integrity freelance

Enthusiastic principle with over nineteen years of experience in the Oil & gas Offshore/Onshore facilities, power plant (geothermal, steam, gas-power plant, renewable energy), chemical and petrochemical (Brownfield / Greenfield plant). Well versed in materials selection, cathodic protection, protective coatings & painting, thermal and cold insulation materials, corrosion, pipeline, piping design and layout, piping materials component and selection of classes, pipe stress & flexibility, data analysis for failure analysis, and mechanical static in Basic design, Pre-FEED, Front End Engineering Design (FEED), Detailed Engineering Design, and Construction with many projects accomplished and was a great achievement. It has been achieved for about fifteen years in the oil and gas with 17 projects, seven years in the chemical and petrochemical sector with 8 projects, and four years in the power plant, geothermal, and renewable energy with 4 projects.   Developing specification of piping material classes, Valve material selection, wall thickness calculation, branch reinforcement, bend and mitter fittings, pressure capacity, hydrostatic test pressure, piping speciality items, data sheets as per ASME B31, ASTM, API, MSS, AWWA, and NACE, and not limited to developing the material's selection diagram (MSD), material selection report (MSR), corrosion allowance (CA) calculation, Corrosion Management Plan, Corrosion control philosophy, Corrosion aspect study, specifications, data sheets, piping index material classes, pipe stress analysis, through Root Cause Effect Analysis with Heat Material Balance (HMB), Utility Flow Diagram (UFD), Process flow diagram (PFD) as references to make them (MSD, MSR, CA) complete. As reaching out the service life design of equipments, piping systems, pipelines that it has to refer the international standards applicable, such as NACE MR 0175/ISO15156, NACE MR0103/ISO17495, NORSOK M-506, M-001, M-501, API 571 & 581, ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME BPVC, ASME, ASTM, API, NACE, SSPC, NORSOK, ISO, DIN, NACE Publications, and etc.   Enthusiastic with artificial intelligence and clean energy to research to implement in the digital transformation and infrastructures energy, oil and gas, and other industries and can use machine learning models.

Engineer, Inspector

I am a mechanical engineer by education, with a wide variety of experience in offshore/subsea systems. I have spent a lot of time designing and building offshore/subsea systems, but I have also spent a lot of time in the field installing and testing them, so I am comfortable in both situations--and ideally in a role that bridges both.

Engineer

Over 12 years extensive and diversified experience in the field of Engineering, Procurement and Construction and Commissioning (EPCC) Management for various oil and gas projects which includes of fixed legged platforms (Satellite Platform and Central Processing Platform-CPP) and Facility management of FPSO Asset management and Operations.

Engineer

More than 5 years of experience in Oil and Gas industries as a structural engineer particularly in design and fabrication. Involved and completed in major projects from detailed engineering design until sail away. Registered member of Board Engineer Malaysia (BEM) since 2017. Able to perform in-place analysis, pre-services analysis and miscellaneous calculations for fixed platform. Perform topside and jacket integrity analysis for decommissioning project. Familiar with current local and international client (Petronas, Shell, HESS) as well as international codes and standards (DNVGL. API, ABS). Involved extensively in both Greenfield and Brownfield structural analysis design, basic engineering, modification, project engineering, construction fabrication and loadout.

Engineer

I am a seasoned technology and project management professional with over 14 years of experience in diverse technical and commercial projects, ranging from small-scale domestic initiatives to large-scale global endeavors. My work spans various industries, including automotive manufacturing, lithium-ion battery production, and automation, where I have collaborated with major players in Malaysia, Japan, Korea, and New Zealand. I hold a Bachelor's degree in Manufacturing Engineering (Honours) and am actively seeking new opportunities to broaden my skill set and tackle challenging projects in Quality Control in Oil and Gas industry. I am flexible in my engineering focus and consistently eager to embrace new challenges. My background includes proven leadership in cross-functional teams and a commitment to continuous learning in Lean Manufacturing and Project Management. My core competencies encompass Quality Control, Quality Assurance, Supply Chain Management, Process Control, Technology Design and Development, Project Management and Agile methodologies, Cost Benefit Analysis, and Data Analysis among others. I have successfully conducted various audits, including ISO 9001 and IATF 16949, and have served as a Management Representative for certification activities. I have successfully managed and delivered multiple Domestic and International Projects (airport and logistics system integration projects) including: 1) Langkawi Airport Expansion 2) New Chitose Airport 3) Montreal International Airport 4) King Khalid International Airport 5) Christchurch International Airport 6) Kansai International Airport 7) FEDEX Logistic Hub, France 8)Gold Coast International Airport 9) Kuala Lumpur International Airport 2 I am detail-oriented, possess strong communication and negotiation skills, resourceful, impactful, detailed oriented and I am dedicated to fostering a collaborative work environment. I believe my proactive approach and strategic problem-solving abilities would make me a valuable asset to your organization. Thank you for your time. I look forward to the possibility of discussing this further. Best regards, Muhamad Fikri B. Mohamad Bakri  

Engineer

Dedicated Project Engineer with over 2 years of experience in overseeing and executing complex engineering projects. Adept at coordinating multidisciplinary teams, managing project execution, and ensuring adherence to project timelines and specifications. Seeking new opportunity to improve career development and growth my engineering expertise.

Engineer

I am an Exploration Geoscientist with expertise in reservoir characterization for hydrocarbon production, subsurface CO2 storage and geothermal energy utilization modeling. Experienced in rigorous data analysis to ensure reliable research results and identify opportunities for project improvement. Effective collaboration focused on fostering an efficient, results-oriented environment. 

Other, Engineer, Supervisor / Technician

A highly motivated professional with over 19 years of experience in Water and Wastewater Management, Chemical Treatment, Product Manufacturing and the Oil & Gas sectors covering for Inspection, Asset Integrity, Safety Relief, Pipeline and Corrosion Monitoring. Demonstrates strong leadership skills, a proven ability to execute projects efficiently under tight timelines, and a commitment to upholding safety and quality standards. Continuously improving knowledge and skills to effectively fulfill business needs.

Engineer, Supervisor / Technician

I am writing to express my interest in the QAQC position within your esteemed organization. Please find enclosed my resume for your kind consideration and favourable response. I have completed my B.Tech in Mechanical Engineering and MBA in Human Resource Management. Additionally, I have acquired certifications in API 510, CSWIP 3.2.1 (Senior Welding Inspector), Lead Auditor, B-GAS Painting Inspector Gr-ll, B.O.S.I.E.T, and ASNT Level-2 courses in Quality Control. Currently, I am serving as a Client Inspector for Total Energies, Thailand, on the TILENGA Project. With over 14 years of experience in the field, I have been involved in various activities related to welding and painting of steel structures and piping as a QA/QC Engineer. My roles have encompassed dimensional inspections, raw material inspections, welding, and painting. I have worked with a wide range of materials including Carbon Steels, Low Alloy Steels, Austenitic Stainless Steels, and Duplex Steels. My project portfolio includes significant contributions to both offshore and onshore projects, spanning across various industries such as Oil & Gas, Shipbuilding, and Refineries. I have extensive experience in vendor auditing and reviewing all quality documents including WPS & PQR, Welder Certificates, ITP, NDT Plan, NDT Map, Consumable Certificates, Calibration Certificates, and Final MDR. Additionally, I have conducted more than 20 ISO audits as a Lead Auditor. Some notable projects I have been a part of include the world's largest Floating Crane (Heerema), the world's first MODEC FSO (with 40 years non-obstruction), FPSO (EQUINOR), Transportation Vessel, McDermott Offshore Projects, and Refinery Shutdowns. I am confident that my skills and experience align well with the requirements of the [Sr. QC inspector] role at your organization. I am eager to contribute positively to your team and help achieve organizational objectives. I assure you of my commitment to discharging my responsibilities with utmost dedication and professionalism. I would welcome the opportunity to discuss my application further at an interview. Please feel free to contact me at your convenience via the details provided above. Thank you for considering my application.

Engineer, Inspector, Superintendent

Highly skilled Production Engineer with over then 12 years of career in petroleum industry, having broad experience in Oil & Gas fields, ranging from reservoir to surface operations, with an extensive background in rigless jobs and wells remedial solutions. Demonstrated excellent analytical and solving problems skills, and recognized for effective teamwork and resilient leadership

Superintendent

Chemical Engineer-PhD with more than ten years' experience in the industry mainly the energy sector (Oil & Gas fields, development center and engineering office) and pharmaceutical sector (R&D, plant). Responsible, detail-oriented inclined person with a high team-work spirit, with ability to work on challenging projects in a multi-cultural and international environment. I am passionate about climate protection and energy transition.

Engineer, Manager

* BSc, Mechanical Engineering

Currently worked as a Corrosion/Pipeline Engineer at Maxgrip. Identify corrosion loops, perform corrosion assessment for topside and pipeline facilities. Produces Corrosion Assessment as part of Risk Based Inspection (RBI) reports for Topside facilities and Pipeline system. Additionally, produced pipeline's reports for Risk Based Inspection (RBI) and Life Extension Study (ALES). Worked with DNV GL as a corrosion engineer. Identify corrosion loops, perform corrosion simulations using Predict 7 and produces Corrosion Management Plan (CMP) and Risk Based Inspection (RBI) reports for (Topside, Pipeline, and Subsea Components i.e. PLEM, PLET, Umbilical, Christmas Tree, Flexible Flowline/Riser, Umbilical Termination Assembly, Spool, Flying Leads). Additionally, produced pipeline's reports for risk based inspection, life extension assessment and fitness for service. Served as a Material, Corrosion, Inspection and QAQC Engineer in PETRONAS Carigali Sdn. Bhd. for 5 years. Involved in brownfield and greenfield projects (Topside, Pipeline, and Subsea Components i.e. PLEM, PLET, Umbilical, Christmas Tree, Flexible Flowline/Riser, Umbilical Termination Assembly, Spool, Flying Leads) from design up to commissioning phase. Worked as an Operation Coordinator for Energy Workforce (M) Sdn. Bhd. for 2 year. Experienced in coordinating projects, handling manpower and equipment, review technical reports and managing office operations. Successfully obtained ASNT Magnetic Particle testing and Dye Penetrant Testing Certificates (Level I and II).

Engineer

I am a skilled professional with extensive expertise in Piping Engineering and a strong understanding of industry standards such as ASME, API, and ASTM. My capabilities include both technical and practical engineering design, with a particular focus on the following areas: * Proficient in analyzing forces and stresses on piping systems, including Primary, Secondary, and Peak Stress, based on ASME B31.3, using both manual calculations and CAESAR II software. * Expertise in evaluating the impact of piping supports on load distribution within piping systems. * Skilled in interpreting pipeline systems and analyzing pipeline routes using isometric drawings. * Experienced in material requirement calculations based on P&ID and design drawings. * Knowledgeable in ASME VIII Div. 1 & 2, with the ability to perform calculations and analysis using PV Elite software. * Familiar with API 650 standards, specializing in Tank Handling through manual calculations and Hexagon software analysis. * Experienced in fluid handling and analysis for liquid and gas systems, adhering to ASME B31.4 and B31.8 standards. * Proficient in reading and interpreting technical drawings, including PID, PFD, Isometric Drawings, Plot Plans, and General Arrangement diagrams. * Capable of conducting equipment age assessments and risk analyses in accordance with ASME FFS-1 and API 580 & 581 standards. With a comprehensive skill set and a strong technical foundation, I am committed to delivering high-quality engineering solutions.

Engineer

Actively seeking for a job due to expiry of current contract. Available immediately December 2024 onwards.

Engineer, Inspector, Manager, Superintendent

I am an experienced FEA Engineer with over 10 years of expertise in the offshore, subsea and marine industry. My career has been dedicated to solving complex engineering challenges using advanced simulation techniques, primarily leveraging ANSYS software. I specialize in structural analysis and design, linear and nonlinear analyses, fatigue assessment, lifting analysis and various other analyses. With a strong foundation in engineering principles and a proven ability to deliver accurate and reliable analyses, I am passionate about optimizing designs to enhance safety, efficiency, and performance in demanding environments. My hands-on experience with industry standards and collaborative approach to problem-solving make me a valuable contributor to multidisciplinary teams. I am now seeking an opportunity to bring my skills and experience to a dynamic organization, where I can continue to advance innovative engineering solutions for the offshore and marine sector.

Engineer

Accomplished and result oriented mentor/engineer/sec4on head with 15 years’ experience in oil and gas industry. Demonstrated skills in commercial acumen, global mindset and exercises sound judgement Champion in Oil & Gas produc4on op4miza4on, reservoir management plan, produc4on planning, idle well restora4on and well work ac4vi4es. To date experienced of 1000+ wells in both onshore (ESPs,PCPs) and offshore. Ini4ate and lead asset value framing, produc4on op4miza4on ac4vi4es for well’s assets for more than 13 years related to produc4on op4miza4on. Support the development of Strategic Ini4a4ves and Area Development Plan for asset-specific, incorpora4ng current and future development scenarios, in line with business strategy through analysis and input gathering on petroleum engineering outlook ie screening, clustering, concept iden4fica4on, fields sequencing and economic evalua4on to come out with short and long term business porVolios. Streamline for data management process covering well, reservoir and facility management (WFRM) and provide fit for purpose solu4ons in challenging areas of field assets development and produc4on planning. Experienced blend of operated and non-operated asset experience. Good technical skills covering well produc4on performance, reservoir analysis and surveillance, sand management, and produc4on planning. Able to mo4vate and direct cross-cultural and mul4na4onal teams to meet project deadlines, quality standards and ensure profitability of opera4ons. Proven success stories and teamwork efforts. Strong communica4ons skills, including the ability to interact effec4vely with a broad range of technical specialists and partners. Ability to work effec4vely within a mul4disciplinary team to create integrated products.

Manager, Engineer, Superintendent

Instrumentation Engineer having more than 12 years of experience in Maintenance and project field.

Engineer

To contribute to the area of Quality Assurance/Control and Integrity in Projects and Operations with the aim of identifying, evaluating, recommending, and implementing improvements which will add value to the organisation. With technical grasp acquired, to further grow in project and people management skills. 

Engineer

I have over 30 years of experience in the oil and gas industry. Of which 13 years was delegated as a Client Representative (CSR) in subsea engineering and inspection. I have managed complex offshore and onshore projects for clients like Etu Energias Angola, OCTOMAR for Total, Chevron Nigeria Limited, Foxtrot Abidjan, SonangolPP and Stapem in Luanda. I have been involved in construction, commissioning, decommissioning and inspection project throughout his career in different part of the world. I have been involves overseeing Air & Sat diving and ROV operations, ensuring project are completed on time and compliance with safety, technical standards. He carried out auditing of contractor and liaison with the contract on project issues. I am therefore looking for a New job opportunity internationally and not only in Europe. Key point of my attached C.V. 1. Client Representative / Subsea Engineer at Etu Energias Angola Soyo from July 2021 – Present - Block 2. (3 years) 2. Senior 3.4u Subsea Inspection Engineer at OCTOMAR for Total from 22th July 18 – May 2021 (3 years) Block 17 & 32. (3 years) 3. Client Representative / Subsea Engineer for Sonangolpp Luanda Office - From 13th October 2011 – February 2017.  (6 years)             I'm available for the following position or any that you see fit. Client Representative Diving, ROV & Inspection. Or Subsea Installation method Engineer Subsea Inspection Manager Project Manager Operation Manager Topside - Subsea Corrosion Inspection Engineer Subsea Inspection Engineer (Diving & ROV) Topside & Subsea Inspection Engineer If you have any questions, please do not hesitate to contact me.

Manager

[//:0] ULLERI ANTONELLO Via DeiGiacinti, 11                                                                                                                                           +39-347-3287603 [//:0] 09012Capoterra(CA)– Italy                                                                                                                             antonello.ulleri@yahoo.it [antonello.ulleri@yahoo.it]   ENGINEERING & PRODUCTION MANAGEMENT PRODUCTION SUPERVISOR| GAS & Oil PROCESS SUPERINTENDENT| OPERATIONS MANAGEMENT|Process Engineer   A top-performing and highly skilled Production and Plant Management Professional with extensive experience in the Operation, Commissioning & Start-up, Turnaround, Management, Design, Safety, Training, Planning across international sectors. Strategic expert with demonstrated knowledge of mechanical/chemical principles, engineering products design,manufacturing processes, material selection, and plant operations. Expertise in Refinery Operations, Commissioning & Start-up, and Production Process Operations has developed an excellent working knowledge through all aspects of Oil & Gas Production. Resourceful ability to think analytically and swiftly,“outside the box”; continuously coaching subordinates, and building productive teams. Possess consistent and precise project planning and execution, with a goal oriented approach that ensures efficiency, success and perfection in a sustainable way, from Health, Safety & Environmental point of view.      AREAS OF EXPERTISE Production & Operations Management   Advanced Project Management    Engineering Planning Health & Safety Compliance                      Contractor Management    Risk Assessment   PTW Coordination   Regulatory Standards    Quality & Cost Control   Construction, Commissioning & Start-up   Strategic Planning/Analysis Team Leadership    Relationship Building   Time Management   Creativity & Innovations   ProblemResolution WordProcessing, SpreadsheetExcel, DatabaseAccess, Graphics, Maximo, SAP, OtherSWTools

My name is Ulung Putra Sakti with 24 years of experiences as Professional HSSE in Middle Management at Oil and Gas Company Offshore and Onshore in Upstream to Downstream Bussiness in Indonesia and Overseas Operation (Algeria, Iraq, Malaysia) in the field of Offshore and Land Seismic Data Acquisition, Offshore Platform Production Process Facility, Process Safety Management, Exploration and Development Drilling and Work Over Work Services, EPCI Project Management of Platforms, Subsea Pipeline, Onshore Processing Facilities. Refinery & Petrochemical Business, Fuels Distribution Management Business. My Current Designation as Sr. Analyst Process Safety Assurance at Pertamina International Exploration & Production with working area at Algeria, Iraq, Malaysia.  Thank you for your time and consideration. notes: Certificates:  Nebosh Technical Safety Oil and Gas, Nebosh IGC, IOS Managing Safely, Modern Safety Management System, Process Safety Management, Hazob, Hazid, Bowtie, SECE, Risk Management, QRA, Leadership Management, Advance Taproot Incident Investigation, ISO 45001, ISO 18001, ISO 14001, HSE Management System Auditor, CSMS, Project Safety Management Review, Major Emergency Management, PTW System

Superintendent, Engineer, Manager