Instrumentation freelance

Objective More than 25 years extensive experienced in general Instrumentation and Electrical related job, starting from Maintenance in manufacturing, Inspection of electrical and instrumentation at oil & gas project. A highly motivated and dynamic individual, creative, full of ideas and intention toward improvements, capable to work independently and as a team either, easily to communicate among all levels of people good team player and Multitasking capabilities.

Inspector

Chemical Engineer graduate from Curtin University, Malaysia with Bachelor's (Hons) in Chemical Engineering. Experience in wastewater management system, oleochemical industry (Kernel Crushing Plant to produce Crude Palm Kernel Oil) production department, manufacturing industry (Perforated Metals, cable support systems, cable trunking). Proficient in Chemical Software such as ANSYS Computational Fluid Dynamics (C.F.D), HYSYS, MATLAB, along with Block and Process Flow Diagram Constructions and Microsoft oriented software (Word, Excel, PowerPoint, Visio). Adept at translating consumer demands into requirements to deliver valuable and sustainable products. Possess experience in understanding product requirements from both technological along with business point of views. Skilled in performing amongst multidisciplinary teams to deliver value towards both organizations along with clients.

Engineer

Executive, Project Material Management with experience in material management process, especially for Electrical and Instrument discipline. Skilled in managing supply discrepancy notes (SDN) and material deficiency report (MDR) for project materials, and involved in reinventing supply chain management (SCM) with a focus on procurement best practices and value creation.

Other

I have experience Outage or Hot section exchanged, and also familiar with gas turbine GE system and woodward, I have experience in power plant at GAS turbine GE and GAS engine wartsila 18V50SG power plant MVPP 470MW site medan, Now I am working in combine cycle power plant tambak lorok (PLTGU 850 MW). I have experience on the project, I as a representative of the company owner oversees and controls the flow project and support the EPC contractor. Erection Power plant 22 MW boiler india jhon Thompson, and erection all part electrical and instrument (check schedule cable, motor list, schedule valve, isometric pipe, Mto, BOM, schedule termination for panel to equipment, Layout drawing for position motor and layout cable tray, ETC).

Supervisor / Technician, Engineer

Graduate from State Polytechnic of Malang majoring Electrical Engineering , I am an Instrument and Control engineering discipline with 2 years experiences in various oil and gas projects in downstream sectors, I have been experienced in the engineering phase for several onshore facilities (Utilities, Hydrocracking complex, gas plant, surface production plant). Support commissioning and projects activities for Instrument and Control Systems, Field Instrument troubleshooting and maintenance, Inspection and Witnessed for field instruments, and Conducted material inspection, and also have experience in EPC company as a Project Control. Motivated to offer the highest opportunity of services with a complete focus in instrumentation and process control. Currently, I Worked in PT. Kilang Pertamina Balikpapan Unit V Balikpapan as System Completion Instrument Technician for RDMP (Refinery Development Master Plant) Revamping. My main role is to rectify, maintain and monitor the Contractor’s works and progress for Instrumentation and Control System for all project phases. Starts from material inspection, FAT/SAT, construction, installation, system integration, up to testing and commissioning.

Engineer, Supervisor / Technician, Inspector

A control and automation engineer with more than 15 years of experience in the engineering and testing of Process Control and Automation systems. Capable of handling a complete control and safety systems package. Proficient in PLC programming and configuration, SCADA and HMI development and implementation of control strategies, interlocks, sequences, integration of third party systems and troubleshooting automated systems. Able to function working on a team environment and have performed collaborative work with my own team, other disciplines, client and vendors to deliver a functional plant control and automation system. Hardworking, dedicated and a motivated professional combined with leadership skills.

Engineer, Drafter / Designer

To have a challenging, creative working environment and gain experience while learn and growing skills in the field of engineering.

Engineer, Supervisor / Technician

Highly motivated Chemical Engineering graduate from Universiti Teknologi Malaysia (UTM) with a strong CGPA of 3.39. Proven leadership and time management abilities developed through serving as a head of technical and logistic unit in Merbauan Adventure and Recreational Club (MARC). Experienced in working collaboratively or independently, with a keen interest in continual learning and adaptation to new challenges. Eager to apply academic knowledge and practical skills to contribute effectively to the field of chemical engineering, particularly in engineering and maintenance, driven by a passion for innovation and excellence.

Engineer

A highly motivated individual with great ambition to progress my career within 3D modelling & Engineering as part of a professional organization. I am a very dedicated hard working individual who is keep to learn. I take pride in my work and I am very conscientious. OBJECTIVE To obtain a challenging position with a growing company that will provide an opportunity to utilized my knowledge of Computer Aided Drafting /design continuing my personal growth where my positive attitude, integrity and strong desire to succeed will contribute to the company's success.

Drafter / Designer

I am Fresh Graduate Polytechnic State Lhokseumawe, I am a Bachelor Of Applied Engineering in Instrumentation and Control Engineering. Experience in Oil and Gas at PT McDermott Indonesia and PT Angkasa Engineers Indonesia as a Mechanical Completion my knowledge Continuity Test and Megger Test,Calibrate using Measuring Instrument to Ensure Efficient and Accurate Operations. The main role in this career involves a deep understanding of the development, implementation, and maintenance of critical instrumentation systems across various industries. Professionals in this field areresponsible for designing, organizing, and maintaining devices that measure, control, and observevarious parameters in production and industrial processes.

Engineer

Driven and detail-oriented engineer with a passion for innovation and problem-solving. Leveraging a solid foundation in the oil and gas field, I am committed to applying my technical expertise to contribute to impactful projects and drive continuous improvement. Seeking a challenging role where I can collaborate with multidisciplinary teams, utilize cutting-edge technologies, and further develop my skills while making significant contributions to organizational success.

Engineer

More than (20) year experiences in FEED and Detailed engineering as a Draftsman Electrical/Instrumentation/Telecom and in the field of Mechanical Structure and Piping, and also freelance job (part time/full time) in engineering consulting for Oil and Gas companies both onshore and offshore using CAD (2D & 3D), PDMS and Naviswork software

Drafter / Designer

Experiences in both technical and site in Oil & Gas, Offshore and shipbuilding field. Fluent English both in speaking and writing. Capable of Electrical, Telecommunication and Instrumentation and Ex related. Be competent in Design, Construction, Inspection and commissioning phase of work. Familiar with regulations, internal rules, main class society rules, industry codes etc. Good at communicating with colleagues and all related parties. Familiar with Brazilian Regulatory NR10, NR27 ETC., attendance the electrical design of P80 projects.

Dear Hiring Manager, I hope this message finds you well. My name is Muhammad Kazam, and I hold a degree in Electrical Engineering along with a Diploma of Associate Engineer in Instrumentation and Control. I am an expert in Electrical and Instrumentation with extensive experience in the maintenance, servicing, and construction of Oil & Gas, Petrochemical, Food Processing, Packaging, and Automation Plants. My professional background includes significant experience in the Oil & Gas and Petrochemical sectors within the Gulf region. I am confident that my education, skill set, and extensive experience make me a strong candidate for this position. Thank you for considering my application. Yours sincerely, Muhammad Kazam Mobile: +923414866766 , +97431075547 WhatsApp: +923414866766 Email: engr.kazam28@gmail.com

Engineer, Supervisor / Technician

Participated in Petronas PROTÉGÉ-GEES programme for 1 year under Wells department to enhance employability competency through communication, personality, teamwork, learning agility and function skills that help for job application. Graduated from University Teknologi MARA in Bachelor of Engineering in Oil and Gas. Have an understanding in the upstream, midstream, and downstream sector during studied. Participated in volunteering programs, part-time jobs to enhance leadership, problem-solving, and teamwork skills. Internship at PETRONAS Chemicals Group Berhad (PCG) for 3 months under Department of Business Project Development of Strategic Planning & Ventures. Gained skills in Research & Development, assisted with technical data and analysis, established a framework for technology, and analyzed valuable insights into the downstream sector. Eager to work in the Engineering field or any related field to boost my career of interest.

Other

More than 7 years experiences in Intrument and Control Operational and maintenance of the power plant and National Gas Company Experienced in Pre commissioning and commissioning of the Power plant project Capable and understand with Operational, trouble shooting and maintenance activities,Open minded, flexible personality & positive attitude. Highly motivated & good oriented. With a Degree of Diploma of Science in Computer Engineering.

Engineer

* Eager to learn new things and enthusiastic of doing works.

Engineer

I am an Instrument & Control Engineer with 4 years total experience. I have experience at proposal phase from start-up / operation and maintenance phase. I am able to build, design and calculate equipment that relate to instrumentation and control such as gauge and transmitter, control valve and on-off valve, PLC and DCS include in build flowchart process to execution phase. I can work with thigh schedule and high pressure condition. If possible with my schedule,I can witness and doing FAT and Commissioning, Please do not hesitate to contact me for more information

Engineer

9 Years of experience in Project Management, electrical and SCADA system. Having involved in national strategic project in Indonesia Railway industries with more than 7 Subcontractors, Consultant Specialist in railway system and Direct Personnel.

Engineer, Manager

Previously work as Instrument E3D Designer at MMHE Sdn.Bhd, a company based in Pasir Gudang, Malaysia providing platform fabrication and shipbuilding. Technical and services for oil & gas industry. Ten years of working experiences in multi disciples that includes designing, manufacturing, and hands-on both electrical and mechanical work fields.

Drafter / Designer

I'm highly motivated Instrumentation Design Engineer with over than 19 years experiences in process plant design, oil & gas, and industries. I have work with many high-profile clients, national or multinational contractor to execute several large engineering projects and EPCC project. I have involved in the implementation of various stage of design such as Conceptual, FEED, Detail Design project in Instrumentation and Control and Electrical for oil and gas and industry.

Engineer, Drafter / Designer

Instrument Engineer with 14 years of experience, working on various turnkey and assessment projects valued at over US$ 25 million. Possesses a strong engineering sense both in the office and in the field. Reliable in managing large-scale projects, leading teams, and delivering work on time and within budget. Proficient in performing pre-commissioning and commissioning activities, as well as predictive maintenance, manpower scheduling, and vendor/subcontractor coordination.

Engineer, Superintendent

More than 20 years of work experience in upstream and downstream, oil and gas industry specifically as an exploration & production (E&P) offshore facility engineer, refinery process engineering specialist, crude oil trader, and petroleum fuels retailer. Possess deep industry knowledge and competency in business development, customer relationship management (CRM), sales, marketing & trading, enterprise resource planning (ERP), supply-chain procurement & management, logistics, and, project engineering & management.

Manager, Engineer, Drafter / Designer

I have the ability to work both in teams and individually, can adapt quickly, and am proficient in reading electrical and Instrument Diagrams. I possess knowledge of Project specifications and PLC/DCS logic. I bring over 4-Years of experience as an Instrumentation Engineer (Field Engineer), along with the Instrumentation Commissioning team, conducting Construction, Pre-Commissioning and Commissioning activities.

Engineer

Ingénieur Électricité Instrumentation Automatisme

Engineer