Instrumentation freelance

An O&G professional technologist with more than 19 years of experience in EPCC, Asset Management and Maintenance experience.

Engineer

More than 23 years of experience with several multinational companies. Experience in project management, construction and engineering in Oil & Gas industry, green energy. Hands on engineering design experience for electrical/control system, industrial robot programming and mechanical design in industrial automation particularly in manufacturing and automotive industry.

Engineer, Manager, Superintendent

I have experience in offshore and onshore job for more than 9 years in Process Control System, Shutdown, Fire and Gas System engineering from design to software development. Total of 12 years including my earlier career in manufacturing. I have found my true passion and seeking for onsite working environment for new challenges and to improve my knowledge in instrumentation. I look forward to hands on jobs and believe knowledge and hands on experience are needed to truly understand and improve any system.

Engineer

To Work in an Organization Providing Good Growth Prospect Electrical Conversion Operation and understand the working principle regarding electrical machines, transformers, photovoltaic, and power electronics with the flow of power Electrical Machine Operation of electrical machine like DC machine and AC machine (asynchronous machine / synchronous machine) when operate as motor or generator with scalar control and synchronize AC machine as generators to the power grid Electrical Power Electronics Operation and working principle of the rectifier (half wave and full wave), inverter, DC-DC converter

Engineer, Drafter / Designer, Supervisor / Technician

Electrical & Instrumentation Engineer with experience in detailed engineering work, material requisition, and coordination for construction and installation activities. Proficient in ETAP, AutoCAD, Dialux Evo, and PLC programming for Omron, Siemens, and Mitsubishi.

Engineer

* A growth-oriented position in a professionally managed and dynamic organization that provides opportunities for career development and responsibilities to contribute towards organizational success. * I have more than 10 years' experience in onshore & offshore Fabrication, * Experience as Product design for Subsea Surface Wellhead & X mass Tree * I am able to lead /supervise integrated process of Design Review, Fabrication, Erection for Structural, Piping, E&I, Insulation & Mechanical system, which is included in parts of Mechanical Completion, Pre-commissioning & Commissioning EPCIC Project Green field & Brown field. Project Fabrication and Erection Structural (Jacket, CPP, LQ, WHP, Pipe Rack etc.) Piping process, Vessels, Tanks, LNG Plant etc. Design and Engineering Execution Surface Wellhead and X-mas tree (single, double, triple bore) and Subsea Wellhead for high pressure and high temperature. * I am has experience for drafting skill and detail oriented for engineering work flow. * Experience as construction representative and Material control for FPSO conversion Project. * I am familiar with method installation for construction phase and final installation for oil and Gas project. * I am has experience for project management role and my previous position as Senior Project Engineer -act. Project Manager for fabrication stage. * I am has experience for piping installation both designing and execution during fabrication stage

Engineer, Inspector, Drafter / Designer, Superintendent, Manager, Supervisor / Technician

I have more than 15 years of extensive experience in the oil & gas industry (offshore and onshore or combination of both offshore and onshore). My experience covered most stages of the project: Front End Engineering Design (FEED), Detailed Design Engineering (DDE), Construction, Hook-Up, Pre-Commissioning & Commissioning, even in some parts of conceptual design. My core discipline area is Instrument and Control System (plus Telecommunication System) and have been the key persons for major instrument packages such as Integrated Control and Safety System (ICSS), Distributed Control System (DCS), Fire Alarm Control Panel and Fire Suppression System, Custody Ultrasonic Gas Metering System, Pressure Reducing Station, Wellhead Control Panel, Analyzer System, Automatic Tank Gauging System, Control Valves, Shutdown Valves, Manual On/Off Valves, Motor Operated Valves, Pressure Safety Valves, Field Transmitter, Telecommunication System, etc. In addition, my experience also includes major involvement in the development of electrical packages (MCC / Switchgear, UPS, etc.), mechanical packages (Heater System, CO2 Snuffing Packages) and HVAC systems. My project experience covered greenfield and brownfield project of offshore wellhead platform, refinery and petrochemical complex, onshore receiving facility, offshore and onshore pipeline, offshore offloading platform, power plant, storage tank area and LPG Terminal. I have experience in becoming Lead Engineer on several occasions, i.e. Lead Instrument, Control and Telecom Engineer for JAWA 1 Project (JV or Pertamina, Marubeni and Sojitz), Lead Instrument & Control Engineer for Bukit Tua Infill Wells Project (Petronas) and as Lead Telecom Engineer for Su Tu Nau Wellhead Platforms FEED Project (CLJOC). I had coordination and interface experience as Project Coordinator during my tenure in TOSHIBA for DCS Migration at Tanjung Jati B Power Plant Unit 1 and JAWA 1 Project (as additional role), which improved my comprehensiveness in knowledge about project execution, coordination and interface.

Engineer, Manager

Experienced professional with 17+ years in engineering (electronic/electrical, mechanical, marine, and telecommunications), IT systems, and integration. Skilled in managing complex projects and delivering innovative solutions for seamless operations. Strong in technical leadership, problem-solving, and achieving high-quality results.

Engineer

I having more than 14 years in active and progressive experience in Electrical & Instrument and Telecom Engineering practices ranging from engineering, fabrication, installation, inspection, and commissioning of the project onshore and offshore with emphasis on oil and gas platforms, topside modules, electrical buildings (E-house), LNG, utilities, central field facilities (CFF), jack up rigs new-building, living quarter. As a “COMPEX/ATEX/EEHA/IECEx” Electrical Equipment Hazardous Area, competent in performing preparation, installation, maintenance & Inspection of explosion protected apparatus in hazardous area and have a clear understanding and knowledge of the various types of explosion protection, installation practices, rules and regulations, and the general principles of area classification. Vast experience and knowledge in installation supervision of HV/LV Switchboard, HV/LV transformer, electrical/Instrument panels, lighting system, UPS and Battery, navigational aid, heat tracing, general alarm, electrical and instrument supports, cable ladder/tray, pulling, glanding, termination of power, control, instrument and telecom. Cables, installation of various field instruments, fire and gas system and another electrical/instrument and telecom equipment. Having good knowledge in international standard and codes such us API, NEMA, NEC, IEC, IEEE, NFPA etc. Familiar with electrical & Instrument drawings, general arrangements, single line diagrams, block diagrams, interconnection diagrams, loop drawings, P & ID and Computer literate using MS Office application, etc. Experienced for Factory Acceptance Test, mechanical completion ITR’s traceability by several system are: ICAPS, PIMS, Zenator, Win PCS * Job Description and Duties * Supervises and monitors the activities of assigned personnel. Performs supervisory duties at the level established by management for the position.  * Reviews drawings, bills of materials and project schedules, seeks clarifications from supervisor, project or design engineers as necessary, and assesses work to be done * Ensures that contractor personnel are thoroughly briefed regarding all fire and safety rules and regulations pertaining to their work, inclusive of attending the safety orientation briefing. * Oversees the construction work in progress, normally of several objects during the same period and monitors erection schedules, checks on conformity to approved drawings, attends site progress meetings, arranges for necessary inspections and liaises with other departments, such as Quality, HSE and other Engineering personnel. * Ensure that work is performed in accordance with approved drawings, contractual terms and good workmanship. * As relevant, liaises with other departments for obtaining Acceptance of Work Certificates on completion of work. * Responsible for the support of Company Safety, environment and Quality policies and programs, and carrying out specific duties and responsibilities related to his job as spelled out in Management system documentation, policies, procedures, local documentation, Management System Manual, Safety Manual and other related documents. * Carries out other similar duties such as providing advice on construction considerations/potential problems to supervisor or to project/design engineers, and ensuring that construction personnel exercise good housekeeping practices to keep the worksite safe and tidy during/after construction. * Ensure that all construction Elec, Instrumentation and Telecom activities are done in line with the Company standards.

Inspector, Supervisor / Technician, Engineer

ELECTRICAL ENGINEER – 9 YEARS' WORK EXPERIENCE Well versed in project delivery from design up to commissioning, electrical engineering to multi-discipline liaising for proper integration. Package engineer for gas/diesel engine generators, transformer, UPS, DCS and Solar Power System.

Engineer, Manager

Hello! My name is Temo, and I have been working as a product design engineer and mechanical structural simulation and calculation specialist for 5 years now. I am currently available to take on new projects in mechanical engineering. I offer you a unique service tailored to your needs and fully adapted to help you accomplish your project. I have recognized technical and functional skills, including: ® Product Development - Mechanical product and system design, 2D detail drawings, 2D assembly drawings, Project management, Technical report writing, Prototyping, Equipment assembly, Product testing and certification. ® Simulation and Mechanical Calculation - Linear static analysis,Non linear analysis (Geometrical non liearity, material non linearity, contact non linearity), Dynamic analysis (free vibration, forced vibration…), Buckling analysis, Thermal analysis, Fatigue analysis, I also have a good command of calculation software such as: ® CAO – SolidWorks, Catia, Creo, Revit ® CAE - Ansys, Abaqus, NX Nastran, Stress) Please feel free to leave a comment or send me a private message with your contact information, and I will get back to you.

Engineer, Drafter / Designer

Bachelor in Mechanical Engineering and Manufacturing, with an exceptional 12-years career in the dynamic and demanding field of Refinery, Petrochemical, Railway, Building Construction Project Management, Production and Manufacturing as well as maintaining facilities, instruments and equipment of the operation. A proven expert in orchestrating complex projects from conception to completion, with a relentless focus on optimizing resources, streamlining processes, and ensuring the timely, cost-effective delivery of critical construction system sector initiatives

Engineer, Inspector, Superintendent, Supervisor / Technician, Manager

Senior Application Engineer / Senior Mechanical Engineer with 11 years of working experience & product specialist in project management for Mechanical Static & Rotating Equipment, Electrical & Instrumentation systems, Special Piping Item Distribution, HVAC/ACMV & Life Saving Appliances (LSA) packages for offshore processing platform, Industrial Refrigeration for Food & Beverages, also Mechanical Piping & Plumbing for waterworks & commercial building.

Engineer, Manager, Drafter / Designer

a final year student majoring in instrumentation engineering sepuluh nopember institute of technology surabaya looking for opportunities in instrumentation and control, calibration, IoT engineer, Web developer. Software engineer, Cloud engineer. With a relentless ambition and a profound passion for excellence. Fueled by the desire for challenges and new experiences, Herdika is committed to making a significant impact in the field of instrumentation engineering. His primary focus lies on industrial instrumentation equipment, PLC, DCS, SCADA, sensors, troubleshooting and maintenance, and programming. With a proven track record of leadership, Herdika possesses robust time management skills and exceptional problem-solving abilities, thriving in fast-paced environments. Known for his approachable nature and unwavering enthusiasm for continuous learning, Herdika actively engages in various extracurricular activities.

Engineer, Drafter / Designer, Supervisor / Technician, Inspector

Dedicated and results-driven Project Engineer with a strong academic background in project management and 1 year of professional experience managing EPCC project from conception to completion. Known for exceptional technical skills, attention to detail, and ability to deliver projects on time and within budget. Adept at fostering collaborative relationships with clients, vendors, and team members to achieve the project goals.

Engineer

an Instrument Engineer with 4 years experiences including Proposal, FEED, and EPCIC for Oil & Gas, Petrochemical, and Bio-Refinery projects. Involved in Detail Engineering Design, Calibration, Construction, Pre-commissioning, and Commissioning stages for onshore & Offshore scope. Have a good knowledge about International Standard and various field instruments (Pressure, Temperature, Flow, Level, Actuated On/Off Valve, Shutdown Valve, Control Valve, Analyzer, Automatic Tank Gauge, Fire & Gas). A dedicated professional to running projects based on target, willing to learn, and can adapt in any condition of work.

Engineer

I have over 15 years of managerial experience around operation, maintenance, and project implementation as a manager and managed the big teams. I heve knowledge and skill in electrical systems, generators, and cellular telecommunications. I have a strong work ethic and good judgment in completing every task and responsibility

Manager, Other, Supervisor / Technician, Superintendent

I am a versatile professional with a knack for precision in structural drafting, piping drafting, and E&I drafting. I bring designs to life through meticulous 3D modeling, specializing in AVEVA PDMS, AutoCAD, and Tekla. Let's build something amazing together!

Drafter / Designer

Accomplished Instrument Technician with 4 years' experience in Trouble Shooting, Maintaining and Installing Various industrial Measuring and Controlling Instruments.

Supervisor / Technician

Proactive and multi-skilled Instrumentation & Control professional offering over 35 years of cross-functional experience in Design, Engineering, Project management, Functional safety lifecycle management, OT cybersecurity lifecycle management, OT systems networking and integration, Rotating machinery control & monitoring system, Pipeline control and monitoring system, Analyzers and shelters, Steam & water analysis system, Continuous Emission Monitoring System, Tank Gauging and Metering system, Vendor Package systems, Plant maintenance, Plant reliability, Technical coaching & training, SAP, Six sigma, Total Quality Management system, Internal and external auditing, Human resources planning and management.

Engineer, Manager, Inspector

I am an Instrument & Control Engineer with 6 years experience in EPC project with instrument & control construction and commissioning. Experienced in field instrumentation, F&G system, HVAC and Analyzer. Familiar with instrumentation & Fire Gas system standard such as IEC, NEC & NFPA.

Engineer

Proficient and diligent Senior Commissioning & Telecom Engineer in managing teams and delivering O&G projects, including E & I, Marine scopes, and project management. Eager and ready to explore new job opportunities and new challenging environments.

Engineer

I am a technician and highly qualified manager in the areas of automation, instrumentation and robotics, always prioritizing safety of workers around me.

I 'm able to assimilate technical information quickly and apply it to given situation. I've always been great team player and leadership

Engineer, Manager, Supervisor / Technician

10.9 Year of experience on major projects in oil and gas, estimation and construction. Activity involvement in Method Statements, Work pack, ICAP Sheet and Job Card,Erection, Execution, Planning, Inspection, Excellent Experience in field construction activities like fabrication & installation of support, panel frames, instrument stanchion, cable trays etc. and installation of instruments, cable tray, JB, ESD/FSD, cable laying, glanding & termination, loop check(HOT&COLD). Familiar with various control system, hands on experience in fabrication

Engineer, Supervisor / Technician